TURNIGY 180esc and Stock motor in MG

[TheBoatbojo]

Hi, I am planning to run TURNIGY 180esc and Stock motor in my MG. I will change the deans.

First of all, will the Stock motor handle 6s or will it burn?
what props would you recommend for 5s and 6s?
Any other mods I should do?

[ron1950]

i run 4 cell 2p and use a m445 watch your temps though

[TheBoatbojo]

Anyone who can help me out with this?

[maxmekker]

Depends on the prop I quess. I have the MG with stock motor and the T 180 esc, and a prather 215, wich is close to the stock.

http://www.youtube.com/watch?v=gqD0KLJ8ckE

The 5,5mm bullets got reallly hot, but motor and esc was just fine.

[yachtsystems]

Stock motor

Blew the motor in my spartan, could I use the speed control and lipos with my stock miss geico? Is the speed control the only thing that sets the voltage, or the motor too? I know one boat runs 7.4 packs and the other 11.1 packs, please pardon my rookie.

[lectriglide]

The stock MG PB motor (1500kv) will handle 6s no problem. The Spartan speed control seems iffy at best with 6s so it's a roll of the dice. Like stated above, the prop size will probably have a major impact on its success or failure.