take a look

[shannon87]

Hi all some of you may have seen this but it looks like miss geico version 2 with some nice improvements such as offset rudder and 60 amp esc im just gunna wait for this one lol because i could never make up my mind between the geico and the motley but the geico kinda had it over the motley for me but with this hopefully no wah wah lol cant wait anyways here is the link and once again nice work darin http://www.horizonhobby.com/Products...ProdID=PRB4075

[LiPo Power]

This is the same hull but with few nice tweeks....

Read here:

http://forums.offshoreelectrics.com/...ad.php?t=25508

Hi all some of you may have seen this but it looks like miss geico version 2 with some nice improvements such as offset rudder and 60 amp esc im just gunna wait for this one lol because i could never make up my mind between the geico and the motley but the geico kinda had it over the motley for me but with this hopefully no wah wah lol cant wait anyways here is the link and once again nice work darin http://www.horizonhobby.com/Products...ProdID=PRB4075

[tlandauer]

HI Guys,
I am not a racer, so I usually don't care if the rudder is off-set. Just want to know on the MG hull what difference would it make? I have a stock rudder set up and if not racing should I leave everything as it is?

[HYDROJERRY]

i just got mine in the mail and from what i hear the inline rudder makes the boat have a hop at full throttle but i dont no for sure i havent run mine yet maybe this weekend!!

[tlandauer]

Thanks, just wondering cuz I got the a hot rod MG from Fine Desisgn, problem is I got Jury Duty this week and couldn't try it, it's killing me!

[d.a.v.e]

Thanks, just wondering cuz I got the a hot rod MG from Fine Desisgn, problem is I got Jury Duty this week and couldn't try it, it's killing me!

What prop came on that boat? Do you know what esc was included?

[tlandauer]

The motor and ESC is Leopard Hobby Brand that Finedesignrc sells. They also sell the modified MG on their site under "hot deals". Motor is 2200kv (482) size, that means 40mm x82mm, ESC is 120 amp con't and 180 amp surge. The prop they supplied is polished/balanced x642 (6s lipo) I believe 4s lipo uses x645 prop. One note, due to the longer motor the inner lid can't be closed properly, I plan to open that front part that is touching the motor and get some soft material to cover it. The outter lid just have enough clearance to close properly. Truth be known one can do this for a bit less money but since i don't have the time I went for their hot rod, they do a first class job, everything looks beautiful. By the way, the ESC looks alot like the Hobbywing SEAKING ESC, it also says "version2" like every ESC that is coming out of Hobbywing, I could be wrong...