where did you get your MG !!!

[HYDROJERRY]

Cool thanks for the info guys!!! Im going to try that!!

[HYDROJERRY]

Well just called them and he is going to email me his email i will order the bracket from someone and email him the link and the total price shipped and he will reemburse my paypal!!!
So where can i get the bracket thing and let it be the nicest one cuz there going to pay for it...

[lonneyb]

AWESOME NEWS DOOD!!!!....Heres the Kintec link...Seems to be THE one..

http://www.kintecracing.com/Miss_Geico_Upgrades.html

[d.a.v.e]

Sounds like you overpaid a bit.. Here is the link hope this helps: http://kintecracing.com/Miss_Geico_Upgrades.html

It did not get stop my bouncing issues with this, but it did change it a bit if that makes sense? Might want to get the break away bolts as well?

[HYDROJERRY]

OK guys thank you,,,

[ron1950]

i have tryed both octura standoffs and the kentec bracket and have to say i like the brute strenth of the kentec bracket......easy to install just make sure your strut bracket is stright.....mine was off about a 1/8 inch and made the darn think turn funny...but a easy fix

[HYDROJERRY]

well i ran it for the first time today and yep lots of hopping,,, i havent gotten the offset rudder bracket yet but wanted to give it a try anyway,,,, ran pritty good but now that im home i did what i do to all my boats and used my compressor to blow out the cooling system and found water bubbles coming out of the screws on the esc!!!!! does that mean the esc is full of water somehow,, should i remove it and send it back or will it be ok??? please help!!!

[HYDROJERRY]

OK so i made my own rudder bracket to try for now to see if it helps with the hopping,,, i just used some peices from a servo mount and think it looks ok,,still not sure about the water inside the esc thow but i gess i will find out today when i go to the lake!!!! anyway heres pics of the rudder bracket i made..

[tiqueman]

Looks good Jerry. Way to be creative! Im not 100% sure, Id have to look at one of my stock esc's, but I wonder if the fittings are screwed in. I bet they are, and your seeing leaking from around the threads.? That doesnt mean your esc is filled w/ water. But, it may be worth a call to Horizon anyway.

[HYDROJERRY]

Hey Scott good to hear from you,,the water seams to be coming out around the black end peices and threw where the wires come out!!!! i wish i could open it up and get in there and seal it up but dont no???? But i gps'ed it this morrning and she hit 34mph,, and yes the esc is still working,, my next prob is its puffing all my batts,,scary!!!!!

[d.a.v.e]

I have noticed a reduced amount of puffing once I got rid of the deans.. Do you still have those?

Wondering if now that I have bullets on the motor/esc connection if it may help that further?

[tiqueman]

And... what packs are you using?

[HYDROJERRY]

Hay guys im running two 2s 40c 5000 and two 2s 25-30c 5000,, but ialso dont think my accucel-6 is charging them perfectly evenly,, i balance charge them everytime!!!!
I have changed all my boats to 5.5 bullets but only at the battery plugs not at the motor/esc plugs,,