*** Miss Geico Video Thread ***

[FrostyNutz]

A thread for all those Vids we make of our Miss G's

Please post your setup so we can do a visual comparison from stock to upgraded. My Miss G is completely stock so we can use this as a reference.

5500 2S Lipo 35c
Stock Miss G

http://www.youtube.com/watch?v=jf7Uauj6vwg

Hope to see some rough water running , highly modded Miss G's, light mods , custom paintwork , race day vids , etc etc . Let's see whatcha got

[ron1950]

nice vid frosty.....what prop are u useing there?

[FrostyNutz]

Thanks Ron ! It's the stock prop with no additional setup mods, just out of the box fun :)

[dano1]

Are ya using the stock rudder location also?, i know you said all stock but was wondering cause i really didnt see any bounce going on, i finally got to make a good run friday with mine, all stock except for rudder kit, man, that was one fun run.....did note m/g was dancing on the hulls left and right, i was in very mild chop waters....more like ripples, and she preformed really sweet, when i got into some glass by edges of shore she just planted and ran smooth, straight, and a little rooster!! Thinking of moving the prop shaft in toward the bottom some more but dont know....need to buy a gps and then play with it

dano

[tacticalretreat]

here's my latest video...I want to get a gps so I can really work on the setup.

I'm running 5000 25C lipos with an x642 prop and the rudder conversion.

http://www.youtube.com/watch?v=nM6Gb0sEyQc

[JackBlack26]

The title explains the setup.

http://www.youtube.com/watch?v=qOa6j-n2EOU

[FrostyNutz]

Are ya using the stock rudder location also?, i know you said all stock but was wondering cause i really didnt see any bounce going on, i finally got to make a good run friday with mine, all stock except for rudder kit, man, that was one fun run.....did note m/g was dancing on the hulls left and right, i was in very mild chop waters....more like ripples, and she preformed really sweet, when i got into some glass by edges of shore she just planted and ran smooth, straight, and a little rooster!! Thinking of moving the prop shaft in toward the bottom some more but dont know....need to buy a gps and then play with it

dano

Yes , stock location . I was foolin around with battery placement and ended up with them about an inch forward from the end of the tray. Not as much bounce or so it seems . I think alot of it is water conditions. lol

On a side note ,,, we had 2 Miss G;s in the water today . I got caught in my buddies wake and fliped . He pushed me back to shore The right battery tray was completely let go from the hull. I used some fiberglass matting to attach it back on . I did the other side while I was at it .

here's my latest video...I want to get a gps so I can really work on the setup.

I'm running 5000 25C lipos with an x642 prop and the rudder conversion.

http://www.youtube.com/watch?v=nM6Gb0sEyQc

That looks a lot faster ! Can't wait to see the gps results . We have one here as well so i'll try to get a stock number asap.. It's snowing hard right now .

The title explains the setup.
http://www.youtube.com/watch?v=qOa6j-n2EOU

Nice ! Too bad you didn't have more room to stretch her legs

[ron1950]

http://www.youtube.com/watch?v=Vd3a9y915Vk

short vid for speed run 4s stiletto 1800 motor 640

[LiPo Power]

Would you please post few detailed pictures of your rudder mod please?
Thanks
Robert
PS
Very good running boat with no whoa, whoa, whoa at all....

here's my latest video...I want to get a gps so I can really work on the setup.

I'm running 5000 25C lipos with an x642 prop and the rudder conversion.

http://www.youtube.com/watch?v=nM6Gb0sEyQc

[Diesel6401]

I'll play along. Stock with a x642. First run out of the box (after changing connectors, motor timing). http://www.youtube.com/watch?v=TsZmdN6FsIs

*Runs tons better with my new setup, no bounce. Video when it gets warm out*

[dano1]

after my maiden run on the new prop i noticed the shaft seems to be slipping out of the coller, sure enuff the dang thing was cross threaded from the factory and my teflon sleeve is now sliding out of the tube due to the prop shaft not being true in the coller, my hobby shop doent have a replacement in stock.......gonna be a trader....shhhhhh....and check some other shops in town, sure was a blast to run tho, 9 minutes to cut off so i kill her at 8, temps good.....they should be since im running in above freezing waters..ha ha, im still getting a little bounce but i dont think im gonna rid it completely. octura x642

[Boomer]

Wondering if you got one of the original flex shafts that was wound backwards?? If you go back and review the posts on that subject you will know how to tell if it is defective from Proboat. They will replace it for free it is one of those.
Steve here at OSE has a very cool replacement kit that is complete with the teflon tube, and lock nut and they are usually in stock
Boomer

[JackBlack26]

New electronics installed. Specs are in the video title.

http://www.youtube.com/watch?v=rd13NhFkjJ4

[LiPo Power]

Could you please post a picture or two of how you have your ESC installed inside?
Thanks
Robert
PS
Is your rudder offset?

New electronics installed. Specs are in the video title.
http://www.youtube.com/watch?v=rd13NhFkjJ4

[Brushless55]

Who's is faster?