single geigo video hauling

[ron1950]

this is a friends geigo...seems he has it set up pretty well now....vid is short but u can see its fast....

http://www.youtube.com/watch?v=Vd3a9y915Vk

[JackBlack26]

Is that stock? Man, these things look like they handle awesome!

[ron1950]

we are running the stiletto motor the 1800kv with the 60a esc in his mine is same with 45a esc...they stay nice and cool and seem to hual the mail.....and yes they do handle extreemly well.....

[LiPo Power]

wicked!!! What prop?

[ron1950]

i think its a x640 in mine friend''s boat is useing a x642

[ron1950]

we had both geigo's out today found that they are both within a mile per hour of each other running 4c2p....dope we had videoing didnt hit the record button lol

[tiqueman]

Looks good Ron, Im tellin ya, put a M445 on it and hold on. 5mph over my 640, 7 mph over my 642, detongued and cupped. It REALLLLY likes that M445. Ive got some other things to try next. I'll keep you posted.

[ron1950]

i cant fit a 445 on my boat it will hit the strut brace unless i lower it a bunch and i dont want to cut it right now....i stripped a bolt out of my offset post and had to order another with the stainless screws and will be out of service all week for painting of the pier57 lol...

[tiqueman]

put file in your hand. remove area at which prop will hit. instal prop. GO RUN YOUR BOAT!

[tiqueman]

You did the offset, theres nothing to cut is there? I dont remember what your looked like. Did you just detach and re-attach your rudder for the offset? I actually cut my bracket at the line where the rudders mount piece stopped at the bracket (towards the transom). Then used that piece as a filler once the rudder was removed. Make sense?

[ron1950]

used the octura offsets useing the holes that were allready there...oh ya i traded larry my 445 lol

[tiqueman]

used the octura offsets useing the holes that were allready there...oh ya i traded larry my 445 lol

I used the same holes in the bracket, just had to drill out the rudder piece for new holes. If thats the case, cut that thing the hell off! then call Larry and trade your 445 back. Hmmm.. I wonder if thats what he was ruinning on his Titan today??????

[ron1950]

i think thats is the prop he ran on the titan...he told me hes looking for another 445 for his other boat lol....he likes it