Miss Geico Race Prep

[Scaler15]

Would younrecommend bullets over ec5?

[d.a.v.e]

They are both the same size so so there should be no difference in power. Personally I'm usually concerned about bullets accidentally touching and go with ec5's. it's just a preference thing I guess.

[justski]

I would love to do one with this paint!
http://www.youtube.com/watch?v=mI-i6...eature=related

i got a quote with the chrome paint $1500 to do my 34in cheetah.....but they said not to run it in water ..lol

[Speedracer128]

That Crome paint is sick!!! I'm in the process of repairing my MG so I'm still deciding what color to paint her. Thinking Pepsi blue but I'm not sure how that will affect visibility of the boat in the water? Would look nice tho

I know this thread is old but I've been searching thread after thread of what folks have done for set up when running her at high speeds 60-70 range? Mine like to take flight once I get her up to speed. I've put strut down batts forward but she still wants to flip.

[IndyHobbies]

Just a good photo to share...I found this tee on ebay a couple of months ago. Yes, I'll be a geek wearing it while running my boat. :)

$(KGrHqZ,!k4FB0(90bV4BQkG0)JIpg~~60_57.jpg

[Rasp]

Just a few questions.

1. What is the best foam to add to the hull to stay buoyant.

2. If possible what is the best way to make all electronics completely water proof.

3. Is polishing your prop a no no.

Regards
Rasp

3.

[Brushless01]

Just a quick question, Would it be safe for me to run 6s on the stock esc in my Geico? (Im already running a CastlE external BEC) Ive ran 5s for 2 years now and just want to know if I can run 6s without damaging my esc?

[MORIDE]

Doubtful, mine didn't last very long on 5S.

[ron1950]

Darin i am with you on handleing I am running a pb1800 motor and m445 and t120 esc Problem is when i get it to turn great one way it sucks on turning the other way Where is the happy medium ground? Any suggestions Very happy with the speed need help on offshore course

[photohoward1]

Mine handles pretty good. I replaced the stock strut with a skegged strut. Stopped the slides in the turns

[ray schrauwen]

What skegged strut? Octura or something else? I get that slide too...

[Speedracer128]

I'm interested also in checking out a strut with a skegg

[rayzerdesigns]

where would you guys recommend starting out prop wise with a ul 1 motor,,im gonna be using it in p spec limited cat..and what timing would you suggest...thanks

[ron1950]

well this question is asked all the time and everyone had a different answer.....ill tell ya that I use a pb1800kv motor and a m445 in mine with 2 4s batts in parallel

[ray schrauwen]

Plus One here. M445 with 1800kv. I run a pair of 3000Mah 4S Zippies in Parallel.

well this question is asked all the time and everyone had a different answer.....ill tell ya that I use a pb1800kv motor and a m445 in mine with 2 4s batts in parallel