new v2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • captainkirk
    Junior Member
    • Jan 2016
    • 5

    #1

    new v2

    just scored a new never used bj 29 v2 at a steal 250$, looking at upgrading esc to either a 120a 0r 180 a seaking only running 4s stock 1800kv motor. which would you choose
  • ray schrauwen
    Fast Electric Addict!
    • Apr 2007
    • 9471

    #2
    Why not an OSE Raider 150amp esc?
    Nortavlag Bulc

    Comment

    • captainkirk
      Junior Member
      • Jan 2016
      • 5

      #3
      was just looking at that one Ray I like that its 6s and 85$ that fits in my budget. do you have any experience with it

      Comment

      • revoltrunner
        Senior Member
        • May 2014
        • 646

        #4
        I bought one and have run it 6 times in my revolt.
        Leopard 3674 1900kv on 4s. X642 prop I'm very happy with it.

        Comment

        • Tamelesstgr
          Fast Electric Addict!
          • Jun 2014
          • 1516

          #5
          I have been running a stock BJ V2 in 2015 on 4s, no problems at all, why would you feel you need to upgrade the 80amp ESC that is in the boat?
          NEVER SATISFIED RACING
          Fine Design 32 V-Hull 4082+6s

          Comment

          • captainkirk
            Junior Member
            • Jan 2016
            • 5

            #6
            just for a back up, and would like to replace motor with the 2200, where I run my boat there r some guys that run 6s on their stock equipment. I keep telling them that it wont last, then I can make a little money and upgrade the esc in my boat

            Comment

            • Tamelesstgr
              Fast Electric Addict!
              • Jun 2014
              • 1516

              #7
              Sounds like a plan
              NEVER SATISFIED RACING
              Fine Design 32 V-Hull 4082+6s

              Comment

              • captainkirk
                Junior Member
                • Jan 2016
                • 5

                #8
                I see most rtr motors are 36mm can was thinking on getting different motor say like a 4
                0mm can motor would that be like a plug n play in my bj 29

                Comment

                • captain kirk
                  Junior Member
                  • Jun 2013
                  • 9

                  #9
                  just outfitted my bj with an ose 150a raider and a 4 pole 3674 2250kv motor and a x642 prop running 4s 50c. cant wait for the ice to melt. still have to blueprint the hull

                  Comment

                  Working...