Need length oF sponson BJ 29

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RandyatBBY
    Fast Electric Addict!
    • Sep 2007
    • 3915

    #1

    Need length oF sponson BJ 29

    Hi guys I need the length of the pro boat black jack 29 sponsons, from the bottom side from the rear to the front, I do not need the overhang in the measurement.
    Thanks in advance
    I am going to cut down a Scat Cat 33 to race next year.
    Randy
    For ABS, Fiberglass, Carbon hulls and Stainless hardware
    BBY Racing
  • 3-UP
    Member
    • Jul 2014
    • 97

    #2
    Just measured my Miss Geico and it's 28" without the overhang 30" with overhang.

    Comment

    • RandyatBBY
      Fast Electric Addict!
      • Sep 2007
      • 3915

      #3
      Thanks 3-UP I am going to build a boat that will be the boat to own in racing in the P LTD offshore class. thanks to you I have the necessary info. My Ovalmaster 29 is the fastest in the district but it needs a face lift to be the baddest on the block. While I am up dating it, I will be running the new Scat Cat 29 that I am going to build this winter.
      Randy
      For ABS, Fiberglass, Carbon hulls and Stainless hardware
      BBY Racing

      Comment

      • montymike
        Senior Member
        • Jul 2012
        • 774

        #4
        Hi Randy I have both v1 and v 3 boat .

        Comment

        • RandyatBBY
          Fast Electric Addict!
          • Sep 2007
          • 3915

          #5
          Originally posted by montymike
          Hi Randy I have both v1 and v 3 boat .
          What is the difference or got pictures?
          Randy
          For ABS, Fiberglass, Carbon hulls and Stainless hardware
          BBY Racing

          Comment

          • montymike
            Senior Member
            • Jul 2012
            • 774

            #6
            That's one for Darin , New hull design suppose not to hop so much, and skip so bad in corners mine is brand new and living in no. Ponds can be run on frozen over can not run till spring. Are lots of of pics on the net. Of it hard to tell in pics but will measure sponson and get bback to ya. Am away from house.

            Comment

            • montymike
              Senior Member
              • Jul 2012
              • 774

              #7
              Funny scat 33 thinking for next project ,14" wide?

              Comment

              • RandyatBBY
                Fast Electric Addict!
                • Sep 2007
                • 3915

                #8
                Originally posted by montymike
                Funny scat 33 thinking for next project ,14" wide?
                I will have to get back to you, it is at the shop. But I race Sport hydro's and do real well with the SC33. I am going to do a sale on hulls only in FG only.
                Last edited by RandyatBBY; 01-02-2015, 12:48 PM.
                Randy
                For ABS, Fiberglass, Carbon hulls and Stainless hardware
                BBY Racing

                Comment

                • RandyatBBY
                  Fast Electric Addict!
                  • Sep 2007
                  • 3915

                  #9
                  The SC33 is 12 inches wide
                  Last edited by RandyatBBY; 01-02-2015, 12:39 PM.
                  Randy
                  For ABS, Fiberglass, Carbon hulls and Stainless hardware
                  BBY Racing

                  Comment

                  • Heath M
                    Senior Member
                    • Mar 2008
                    • 806

                    #10
                    What sale you having randy? I'm looking for a 33" cat to oval race.
                    Brisbane,QLD, Aussie

                    Comment

                    • montymike
                      Senior Member
                      • Jul 2012
                      • 774

                      #11
                      21 innches from back Of ride pad to were bow turns up,
                      There is no stop the ride pad flows into the bow so is a guess. Hope helps.

                      Comment

                      • RandyatBBY
                        Fast Electric Addict!
                        • Sep 2007
                        • 3915

                        #12
                        On a Scat Cat 33 Hull Only the sale price will be $175.00 in FG plus shipping and tax if in California. Add full Carbon fiber +$100.00, add Kevlar to hatch and deck $50.00.
                        Randy
                        For ABS, Fiberglass, Carbon hulls and Stainless hardware
                        BBY Racing

                        Comment

                        • montymike
                          Senior Member
                          • Jul 2012
                          • 774

                          #13
                          Total length of both sponsons (vi and v3) are 291/2 with a 2 inch overhang. So total sponsons length 27.5" mike
                          Last edited by montymike; 01-03-2015, 01:14 PM.

                          Comment

                          • montymike
                            Senior Member
                            • Jul 2012
                            • 774

                            #14
                            Does the cf boat need to be painted?

                            Comment

                            • RandyatBBY
                              Fast Electric Addict!
                              • Sep 2007
                              • 3915

                              #15
                              This is how the Fiberglass comes. I takes well to any paint. The picture is a Race Basic sale price $290.00 these prices are good for the month of January.
                              Randy
                              For ABS, Fiberglass, Carbon hulls and Stainless hardware
                              BBY Racing

                              Comment

                              Working...