Esc?

[macz]

Well I was running her with my 7 cell 4600 promatch...and I ran her a ground across the pond slightly. The boat was still in the muddy water when I retrieved her the red and blue connectors had popped off...did it put too much load when it got stuck sort of in the grassy mud and melt the connectors off? Also I had an old esc which I took the connectors off and sort of half soldered... I tested it and it seems to work but what happened?

[mtk]

red and blue????

[bwells]

me too! red and blue? must be brushed and between esc and motor. Slap some solder on the connections and away you go