Stickers coming loose due to hatch tape

[MT-Tank]

Newbie question:
My BJ26 is four months old and I have been taping the hatch, as I learned here. The top clear film is starting to separate due to the repeated tape removal. The paint within the sticker is still intact.
1: Can the top film be reattached with a product? Solvaset or something that accomplishes the same thing?
2: Can the top film be removed from the underlying decal paint and leave the pattern intact? If so, any hints? Any subsequent product to protect the paint?

I am fine with the stock looks and don't have the time for more than a simple repair.

Thanks!

[bwells]

It looks as if the blue is paint but the ones you need to worry about are the gray and yellow decals at the rear. I just pull slowly towards the back at a 180 degree angle, not straight up, and haven't had any problems

[bigpapa]

mine did the same thing took a hair dryer and took the darn things off
cheap stickers i would think good luck

[kookie_guy]

I removed all the stickers too. Actually looks better without them (IMO).

Could be the kind of tape you are using too. I tried using one type before that left all the residue and it was hard to clean.

Now I use the scotch type clear tape. Just buy the rolls in bulk at an office supply store. Sticks well, and peels very easy with no residue

[bigpapa]

sure does look better 4 sure

[bigpapa]

i also use the multi color electrical tape 2.00 for 5 rolls blue green white yellow and red at the walliemart walmart lol no residue and it mathes your boat colors

[MT-Tank]

OK, this may sound like a contradiction:
1) I don't care how the boat looks on the water so I use black electrical tape. Boat is too far away from spectators and moves too fast. (White would be better when I find some.)
2) When it is static I want it to look good. I don't want to ruin the multicolor pattern of the decals as the top layer comes off. Can it be removed safely? Can it be resealed safely and with what?

Paul