Upgrade motor and esc

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bitton79
    Member
    • Aug 2008
    • 35

    #1

    Upgrade motor and esc

    Hi guys,
    I want to upgrade my bj26 motor and esc. I saw the threads around here regarding upgrading motor and esc, but in most of them the recommended esc is the hydra 120 or barracuda 120 or etti esc which are very exspensive. my budjet is around 150-200$ for this.
    I run 2x2s1p 5300mah lipo's that can handle 100 amps of current with 150 amps pick easly and fuller's hardware with an Octura x640 and x642 b&s from OSE.
    I was thinking of the ammo 2300 or the feigao 540 9XL or 11L/12L as an upgrade motor (although, i think the 540L series has less power than the stock motor...) and i was thinking of the x-power 100 as an upgrade esc.
    What do you guys know from your exsperience? what are the best combinations in 150-200$ range?
    Thanks' guys in advance.
  • detox
    Fast Electric Addict!
    • Jun 2008
    • 2318

    #2
    I would use the new UL1 motor/esc combo. The three piece cooling jacket designed for this motor has leaking problems, so I would try to reuse the BJ jacket on this UL1 motor or fabricate a cooling coil using 3/16" K&S aluminum tubing

    Tower Hobbies carries an expansive collection of RC cars, RC airplanes, RC boats, model trains, sot cars, and supplies for all hobbyists.

    Comment

    • RCprince
      Fast Electric Addict!
      • Jul 2007
      • 1637

      #3
      http://www.offshoreelectrics.com/pro...od=dh-aqug7001
      Samuel Johnson - “An injustice anywhere is an injustice everywhere.” William Cooper "listen to everything, read everything, and believe nothing unless you can prove it in your own research!"

      Comment

      • bitton79
        Member
        • Aug 2008
        • 35

        #4
        Will the Ammo 2300 or the feigao 9xl are good to go with the x-power 100 esc?
        Has anyone tried that combination?

        Comment

        Working...