Black Jack 26 Twin

[Eggy]

What kind of water intakes are you using? Cant see any on the pics.
Also replace the RX battery pack with a Castle Bec, only what will shed of around 100g.

[kookie_guy]

What kind of water intakes are you using? Cant see any on the pics.

post #2, the last picture of the bottom of the hull. You can see the 2 pickup tubes near the transom. He has them mounted to the bottom of the boat.

[wirenut67]

Ok forgive such a noob question. The shafts come out of a part called the strut correct? What brand of struts are on this boat? I have a bj26 I am rebuilding and have decided to go for twins....eh why not right?

How does this type of strut work with a stuffing tube? How does it exit the hull?

I know you guys are probably cracking up at my lack of a clue, but hey how else am I gonna learn this stuff! hahahaha

This thing is an inspiration.


Mike

[mtk]

hahahaha I no alot about our boat but I still get confused 2 ok yes it is a strut but what Power system will you use

[mtk]

this means moter esc drive wire or flex shaft

[kookie_guy]

Ok forgive such a noob question. The shafts come out of a part called the strut correct? What brand of struts are on this boat? I have a bj26 I am rebuilding and have decided to go for twins....eh why not right?

How does this type of strut work with a stuffing tube? How does it exit the hull?

I know you guys are probably cracking up at my lack of a clue, but hey how else am I gonna learn this stuff! hahahaha

This thing is an inspiration.


Mike

that my friend, is a stinger strut.

http://www.offshoreelectrics.com/pro...os-stinger-str

[wirenut67]

Thanks Guys!

I have no idea what motor to use. But I sure like those two struts. reasonable price as well.

Do you guys have any motor and esc suggestions that are close to what he used on that twin he built?

The more I look at it the more I WANT ONE!

how does the stuffing tube work with this kind of strut? Does anyone have a picture of how the stuffing tube and strut come together, or does the shaft just come through where the strut bolts tot he stern?

Guys seriously I am sorry for all the dumb questions, I am just wanting to learn all I can!

Thanks for the help guys!


Mike

[tiqueman]

Holy Mudl, that is insanely awesome! Fantastic job and twice as fast as mine... thats not right.

Scott

[mtk]

out of stock

[mudl]

Hello

this are my motors

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6527&Product_Name=Turnigy_B36-56-04_2600kv_Inrunner

and this are my struts

http://www.hopf-modelltechnik.de/PRO-LINE-Bi-Color-Powertrimm-Flexwelle-32-mm-links

http://www.hopf-modelltechnik.de/PRO-LINE-Bi-Color-Powertrimm-Flexwelle-32-mm-rechts

My take off for the watercooling is at the bottom of the cat.This are only two little holes.It works great.i make it on every of my boats

greetings
mudl

[RCprince]

wow, 25 dollar motors, lol...your putting fractures in a lot of preconceived theories of buying expensive equipment.

[tiqueman]

Hello

this are my motors

http://www.hobbycity.com/hobbycity/s...600kv_Inrunner

Not at all what I was expecting to hear....

[Brushless55]

Hello

this are my motors

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6527&Product_Name=Turnigy_B36-56-04_2600kv_Inrunner

greetings
mudl

That's amazing from such cheap motors!
maybe I will pull my stock Venom motors and try these out..

[rockwerks]

electronics dont have to be expensive to be good, we have 50.00 esc's that perform better than the 240.00 units also.

[mudl]

Hello

now i made some new testdrives.
I reduced the complet weight of the boat about 10 %.
Speed was the same.
Today i chagenged from 4s lipo to 5s Lipo

New Topspeed is 79,3 mph

Next Drive i hope the BJ 26 runs over 80 mph


greetings
mudl