BlackJack SS Conversion

[Camaroracer]

not really just use a sanding block and start with 120 and work your way from there
i used a flexible one from my local auto paint suppler, and always use the block you can to get the best results

[Camaroracer]

its going to be a couple weeks till i can paint it

[Camaroracer]

Well its been more than a few weeks and its still not painted yet but i got the stuffing tube put in and the strut mocked up.
Where should i place the rudder on this in relation to the inside of the tunnel?

[Skholar]

If you don't mind, could you give me a listing of the hardware in the photo...the parts numbers?

Thnaks

[Camaroracer]

Rudder and Strut: BJ26BLSS by Pro Boat (PRB3330)
Propeller Strut: BJ26BLSS by Pro Boat (PRB3331)
Flexshaft: BJ26BLSS by Pro Boat (PRB3332)

The stuffing tube is also the stock blackjack part, but it doesn't need to be changed unless yours is worn.

[Skholar]

Rudder and Strut: BJ26BLSS by Pro Boat (PRB3330)
Propeller Strut: BJ26BLSS by Pro Boat (PRB3331)
Flexshaft: BJ26BLSS by Pro Boat (PRB3332)

The stuffing tube is also the stock blackjack part, but it doesn't need to be changed unless yours is worn.

thanks..Im gonna have to make this conversion soon myself. I also have a Miss Geico that I'm much happier with, but Blackjack has the potential to become a great boat once converted!!

[Stephavee]

I've made this conversion myself and i was wondering how much power the drive system can handle? I see lots of people upgrading there flex cable and motor coupling alot and would like to know if this is something i might have to do.