Motor poles

[Duclover]

I guess it's just a matter of opinion, the stock motor is a very good motor but I hear alot of folks running the ammo. are you running 3s or 3s x2 total of 6s that 120 amp esc should handle 6s but i'm not sure the stock motor can.
I thought I should be asking you this ?, you being a senior member, i got alot of info from you in the past in these threads, thank you.
try looking through past threads, i'm sure you will find the answer to this question.

I've read multiple opinions on this matter but I question the validity of some as the Kv of different Ammo motors has varied. I know the stock BJ motor is beyond sound, however, I question the input of some as they just don't jive. I have no answer to this query and look forward to an educated response...patiently. In addition my application is progressive from a 2s 25c 5000 mah parallel set up to a 4s 25c 5000 mah set up to play with, hopefully in the next week. 6s is beyond my scope at the moment.

[Duclover]

4s 25c 5000 mah series set up is what I need to elaborate on from previous thread.

[MAXAMUS]

I guess it's just a matter of opinion, the stock motor is a very good motor but I hear alot of folks running the ammo. are you running 3s or 3s x2 total of 6s that 120 amp esc should handle 6s but i'm not sure the stock motor can.
I thought I should be asking you this ?, you being a senior member, i got alot of info from you in the past in these threads, thank you.
try looking through past threads, i'm sure you will find the answer to this question.

Been out of touch with this thread for a while maybe i worded that wrong it would of been better what do people prefer i have run both but currently running the stock motor on 6 cell lipo with 120amp esc with good results maybe will swap them over again to compare its been a long time since the ammo got to rip it up