Newbie with some questions...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • arakari
    Junior Member
    • Mar 2010
    • 4

    #1

    Newbie with some questions...

    Hi everyone !, this is my first post in this forum, I live in Spain so you must excuse my English...
    After reading a lot in the forum, I'm almost decided to buy a Blackjack 26BL, I've never owned a boat, but I'm an experienced rc electric car modeler so I'm not new in the hobby, I know about brushless, lipos, etc, but I don't know much about hulls, props..., etc.
    I want the boat for playing in a lake close to my house with my kid, no competition, just go fast and learn about this beautiful and fast machines, so my question is..., do I need to upgrade something in the boat?, or just RTR with a few cheap modifications such as better prop, good batts, programming card, weight balance..., would it be enough for me?, in other words, do I need to upgrade the hardware or it's just fine with stock one?

    thanks!
  • Alfa Spirit
    Fast Electric Addict!
    • Oct 2009
    • 2131

    #2
    I prefer the KOS from Venom, easier to upgrade and very nice cat'. Sorry for my bad english, I' m from France

    Comment

    • arakari
      Junior Member
      • Mar 2010
      • 4

      #3
      Nice cat, it is, but much more expensive than BJ, does it offer more for less?

      Comment

      • LiPo Power
        DJI Drone Advanced Pilot
        • May 2009
        • 3186

        #4
        Black Jack 26 BL is a wicked boat, get it!!!
        And yes. For now get LiPos, progm card, X642 prop and you will rip that pond of yours for real!!!!
        Have a fun!!!!
        This is one of the best electric RC boat forums you could end up on......
        Robert





        Originally posted by arakari
        Hi everyone !, this is my first post in this forum, I live in Spain so you must excuse my English...
        After reading a lot in the forum, I'm almost decided to buy a Blackjack 26BL, I've never owned a boat, but I'm an experienced rc electric car modeler so I'm not new in the hobby, I know about brushless, lipos, etc, but I don't know much about hulls, props..., etc.
        I want the boat for playing in a lake close to my house with my kid, no competition, just go fast and learn about this beautiful and fast machines, so my question is..., do I need to upgrade something in the boat?, or just RTR with a few cheap modifications such as better prop, good batts, programming card, weight balance..., would it be enough for me?, in other words, do I need to upgrade the hardware or it's just fine with stock one?

        thanks!
        DJI Drone Advanced Pilot
        Canada

        Comment

        • arakari
          Junior Member
          • Mar 2010
          • 4

          #5
          thanks for your input, Robert; I have many lipo packs from my cars, most of them 5000 or 5200mAh hard case 40c, hope they would go fine with the boat, and they'll fit. Also, I plan to install my Kopropo ex5ur instead of am radio.

          I can't wait to get it, the Venom is also nice option, but pricey and electronics are too much for me, besides I should buy 3s packs, and I can't spend more than $400.

          is the stock servo standard torque and gearing? I can't find much information about it.

          still studying the forum...

          Comment

          • LiPo Power
            DJI Drone Advanced Pilot
            • May 2009
            • 3186

            #6
            Your 5000 and 5200 Lipos are going to move your boat forward, for real...
            make sure to get program card and change your ESC to LiPo!!!
            One day concider changing your hardware to Fullers like the one on the picture or this one:
            http://www.offshoreelectrics.com/pro...prod=ose-80085
            Cheers
            Robert





            Originally posted by arakari
            thanks for your input, Robert; I have many lipo packs from my cars, most of them 5000 or 5200mAh hard case 40c, hope they would go fine with the boat, and they'll fit. Also, I plan to install my Kopropo ex5ur instead of am radio.

            I can't wait to get it, the Venom is also nice option, but pricey and electronics are too much for me, besides I should buy 3s packs, and I can't spend more than $400.

            is the stock servo standard torque and gearing? I can't find much information about it.

            still studying the forum...
            Attached Files
            DJI Drone Advanced Pilot
            Canada

            Comment

            Working...