Upgrade from a stealthwake

[be8843]

Do you know if the rudder is stainless? I was looking at pictures on the proboat site and it looks stainless on the black jack and plastic on the miss geico. Unless they upgraded them with the v3.

[fweasel]

V3 hardware is black anodized aluminum, on the Geico, Blackjack, and Impulse 31 for that matter. The website picture is incorrect.

[Erroneous]

V3.. https://m.youtube.com/watch?v=Rxd_qGFopoM

[be8843]

V3 hardware is black anodized aluminum, on the Geico, Blackjack, and Impulse 31 for that matter. The website picture is incorrect.

That's what I figured.

[be8843]

Bit the bullet and bought a Miss Geico before I can't find one!

[fweasel]

Bit the bullet and bought a Miss Geico before I can't find one!

Fun boat, you're going to enjoy it. Re-plumb the cooling lines first thing: Rudder, ESC in, ESC loop, ESC out, motor lower in, motor upper out, and then out the side of the boat. I also don't like the red grease that comes in the stuffing tube, too thick. I would clean that out and use the blue Proboat stuff after each run.

[be8843]

Thanks for the plumbing advice. I have plenty blue grease. That's what I did with my stelathwake.