***NEW*** - Pro Boat River Jet Boat - 23"
Collapse
X
-
***NEW*** - Pro Boat River Jet Boat - 23"
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Tags: None -
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
If you are on Facebook, Rafael will be going LIVE on the Horizon Hobby page at 9:30CST Today... (Thursday, January 12, 2017)
"We will be going live on Horizon Hobby Facebook with special guest and product developer Rafael Lopez at 9:30 CST!!"
Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
another self righter it appears ?volantex vector pro ,proboat veles 29 , traxxas spartan, hobbyking/tfl pursuit ,ft009 with rescue riggingComment
-
Waiting to learn about shaft maintenence. I've been waiting for this release since Mickiebeez and sick RC came out with one. Lucky for me I made my own jet boat so I don't have to buy this one.Comment
-
I've seen it run and it was pretty dang fast too. When I saw it there was no cockpit design yet and what Raphael chose looks much better than what he explained to me, the way I pictured it. Looks top notch. I'm impressed how this turned out! Good job Raphael32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Very cool boat. Can't wait to see it run. Facebook video with Rafael said it can run 4S. Specs say 3S? Can run in 2" of water. You can add a trim servo if you run a 3 channel radio. All pump parts are replaceable. Nice work Rafael!Comment
-
Just read the manual. It looks like a major disassembly of the jet drive to grease the shaft. Otherwise, I love the design.Comment
-
Something VERY easily dealt with with just a speck of imagination....
Back when I converted a FASTech to a jet, I simply drilled a small hole through the housing into the stuffing tube, and threaded in a water cooling nipple. Just remove the cap and inject some lubricating oil. Done... Never had to remove the shaft again.
Shaft_Lubing.JPGDarin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
Something VERY easily dealt with with just a speck of imagination....
Back when I converted a FASTech to a jet, I simply drilled a small hole through the housing into the stuffing tube, and threaded in a water cooling nipple. Just remove the cap and inject some lubricating oil. Done... Never had to remove the shaft again.
[ATTACH=CONFIG]148678[/ATTACH]Comment
-
Sweet! Nice alternative to buying an over priced NQD and putting good parts inside! Fun river/creek boat, plus makes a fantastic rescue boat! I'll be purchasing one, for sure.Comment
-
A very cool addition to Pro Boats line-up......and AQ still lags way behind in any new options.Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
Comment