Yes sir! Same motor and the Miss GEICO 29 and Blackjack 29. It has proven to be a work horse, as long as the front bearing is maintained; oiled as regularly as the flex cables are greased.
My new zelos 36 twin!
Collapse
X
-
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751 -
I normally regrease the flex after every 1-2 battery packs. At least after every time I run the boat. The bearings really require that much maintenance?Comment
-
When talking about 2000kv motors on 6s, yes. For our lower KV motors in the Impulse, Voracity and Zelos 48, I'd say you should maintain them after/before every outing. I pull my flex shaft/s after I'm done using my boat for the day, even if I'll be back out tomorrow. Now I'm forced to grease the shaft when I reinstall it and at the same time I can put a drop of oil or two on the front motor bearing.Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751Comment
-
Ok. Thanks for the advice. I guess it's not really that bad since the motors don't need to be removed. Is there any particular oil/oiler setup that has worked well for you?Comment
-
I am quite Jealous! Zelos seems to be the big boy the block!Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, ZondaComment
-
I use one of these filled with some 3 in 1 multi purpose oil works good
http://www.avidrc.com/product/5/acce...cessories.htmlComment
-
Thanks for the recommendation MXkid!Comment
-
Rafael Lopez
Product Developer-Pro Boat
My Facebook https://www.facebook.com/profile.php?id=100010183246751Comment
Comment