Best prop to use

[BBZRacing1]

I have

[TCR]

What is the best prop to use for a SV27 NIMH boat. I hear about X642s and Grimracers 42x55s. Right now I'm running a 40x53 which is much better than stock. Also, I cant find a B&S x642 to save my life???

[z400]

What is the best prop to use for a SV27 NIMH boat. I hear about X642s and Grimracers 42x55s. Right now I'm running a 40x53 which is much better than stock. Also, I cant find a B&S x642 to save my life???

Buy a x642 and pay someone to sharpen and balance it.

[egneg]

What is the best prop to use for a SV27 NIMH boat. I hear about X642s and Grimracers 42x55s. Right now I'm running a 40x53 which is much better than stock. Also, I cant find a B&S x642 to save my life???

I can B/S a X642 for you. Here is a link for sample pictures.

http://forums.offshoreelectrics.com/...ead.php?t=7367

[z400]

I can B/S a X642 for you. Here is a link for sample pictures.

http://forums.offshoreelectrics.com/...ead.php?t=7367

ive still got that p220 i asked you about.
I picked up a x642 that has already been worked.
Im gonna see how the boat runs, may or may not need the p220 done.

[egneg]

ive still got that p220 i asked you about.
I picked up a x642 that has already been worked.
Im gonna see how the boat runs, may or may not need the p220 done.

No problem Sean. I know that a P220 works well on the BJ26 but haven't heard of anyone using it on the SV27 to my knowledge. I did however receive a PM about a modded X642 that I did that registered 45 mph on a radar gun.

[soliverg]

Props

I like the CF 48 and this one from RC Boat Bits, Also run 7 cells

[H&MWill]

No problem Sean. I know that a P220 works well on the BJ26 but haven't heard of anyone using it on the SV27 to my knowledge. I did however receive a PM about a modded X642 that I did that registered 45 mph on a radar gun.

I run a P220. Seems like a little more top end than the 642.

[Brushless55]

I run the CF48 and love the hole shot!

[TCR]

I run the CF48 and love the hole shot!

What are you guys running for a motor and esc?

[Brushless55]

Stock!

[z400]

Ive heard both good and bad news about those big cf48 props.

[Brushless55]

I love the CF48 on my stock SV27 and jumps out of the water like a mad man!
All I did was add a different water pickup.. esc temps around the upper 90s and motor 100* to 110* tops

[riverside4]

Yes i would have Egneg do a x642 for you you wont regret it. When i got mine back from him i got 45 on radar gun it was the best my boat ever ran. Adjusted the trim tabs a little and now i get 46 on first 2 passes and 42-44 through the run and temps are good for a 4-5 min run. Also have tried cf42,45,48 and a prather s220. The x642(45-46) has a little more top end but the s220(42-44) has more rip but you have to watch the temps with the s220. As to the cf props i think the cf45 is the best for a stock setup i get better top end than the cf48 but the cf48 gives a better hole shot but thats it less top end and higher temps and boat is harder to drive. Hope it helps.

This is on a stock setup and 2x2s lipos (4000-25c,4500-30c)

[riverside4]

What is the best prop to use for a SV27 NIMH boat. I hear about X642s and Grimracers 42x55s. Right now I'm running a 40x53 which is much better than stock. Also, I cant find a B&S x642 to save my life???

OSE has the x642 in stock maybee you can buy and have shipped to Egneg and have him S/B for you. http://www.offshoreelectrics.com/products.php?cat=87