Lipo DPR Tests

[sjslhill]

Hum, looks like that boat has very low energy requirments.....you can run down to 12V and you did not get close to that.

However the lower the temp the longer the packs should last.

[SJFE]

It looks like that. I need to back that data up with @ least two more tests to verfie it. Temps on my boat are almost always mild. I am confident they will hold up. I have the recharged and stored all ready. Saturday I plan on 4 or 5 hours out on the water with both boats. I want to collect some data on the BlackJack with 16cells.

[ice329]

Steve if you run duel 4000 packs per side... holy cr_p you can run for a long long time.

Try to keep those batterys in stock... heheh


By the why WHY are you selling your SV ! Keep it

[sjslhill]

You guys are doing some great stuff.....

[SJFE]

I am trying my best Ice is doing great work also. I wouldnt be doing it if not for you Sir. I am going to pick up the 14.8s soon. I have a good feeling about that setup also:).

[Rex R]

normally with windoze, one can use 'print screen' to capture a screen shot and then paste into a graphic utility to save as. irfanview works well for this(free too :)).

[Fast Guy]

Then it on to the 14.8s in parallel.

I was going to try the 14.8's in parallel. At 20C-8000mah combined it should be a very good setup for the price. I will wait for the results. Good work SJFE

[ice329]

Looking at the numbers a little deeper. The average current at 11 amps is not really right, the reason is because the tool is recording and counting the current before the run also.

Looking at the graph I would think the motor is pulling (not bursts) between 45 amps and 25 amps. Anyone agree?

I am curious to see if these peaks and averages go up using the IB3600 packs.

[SJFE]

I have the start set to delay. but only for 10 seconds. Looking at the graph I need to set it for 90 seconds to account for time to tape the hatch and launch. Give me another week and I'll have it refined to a scince.

[ice329]

I know you know what I am saying, I was just thinking out loud so to speak.

[sjslhill]

Hard to say but your correct....need more testing.

[MoparB]

You said a bad word in the first vid.

Awesome performance from that setup. Really flies.

[SJFE]

Sorry...potty mouth.
Thanks.
I plan round 2 of testing this Sunday. This time I will be gathering data on the IB3600s also.