Building a tool bag am I missing anything

[Geeves]

Building a tool bag am I missing anything?

(1.) 10mm Wrench -Loosing the cable coupler
(2.) 12mm Wrench -Loosing the cable coupler
(3.) 1.5mm Hex Key -Remove cable coupler from motor shaft.
(4.) 5.5mm Wrench -Nuts on motor mount
(5.) 2.5mm L-Hex Key -Screws on motor mount
(6.) 2.5mm Hex Key -Remove motor from motor mount plate
(7.) 2.5mm T-Hex Key -Remove radio box from hull
(8.) 2.5mm Hex Key -Remove trim tabs
(9.) 2.5mm Hex Key -Remove turn fins
(10.) 3mm Hex Key -Adjust turn fins
(11.) 3mm Hex Key -Adjust strut angle
(12.) 7 mm Wrench -Adjust strut angle
(13.) 2.5mm Hex Key -Remove strut from hull
(14.) 1.5mm Hex Key -Remove rudder blade
(15.) 2.5mm Hex Key -Remove rudder mount from hull
(16.) 2.5mm Hex Key -Remove rudder control arm
(17.) 2.5mm Hex Key -Remove rudder linkage from rudder arm
(18.) Pliers -Remove rudder linkage from threaded push rod
(19.) 1.5mm T-Hex Key -Remove drive dog
(20.) 7mm Wrench ? -Remove Prop
(21.) Phillips Screw Driver -Remove Servos from radio box

[Mich. Maniac]

You are missing ALOT. You should see what I bring. Its seems ridiculous but I still sometimes dont have what I need, (or others need). its amazing really. A few thing i see missing, depending on your run site....

soldering iron
shrink wrap
volt meter
charger
spare velcro
grease
RAGS
hatch tape
scissors
radio batterys (or charger)
spare and diff. size props
spare prop nuts

[eclipse]

gloves
swimming shorts or fishing pole
glue
screws incase rudder screws brake
extra motor coupler
just to name a few more

[skidooguymxz550]

quick setting two part epoxy
ca glue
spare servo
thin ply wood

[Geeves]

For a perfect supply bag I should carry..

Tools:
1.5mm Hex Key
2.5mm T-Hex Key
2.5mm L-Hex Key
3mm Hex Key
5.5mm Wrench
7 mm Wrench
10mm Wrench
12mm Wrench
Phillips Screw Driver
Pliers
Wire Cutter/Strippers
Soldering iron
Scissors
Volt meter

Running Supplies:
(2) Chargers
(4) Packs
Grease
Oil
Hatch Tape
AA For Radio

Extra Parts:
Screws incase rudder screws brake
extra motor coupler
Spare and diff. size props
prop nuts
Spare servo

Extra supplies:
Quick setting two part epoxy
ca glue
thin ply wood
RAGS

[Ocean Racer]

looks good to me. Me i personally bring a 2 batts a boat and a radio ad thats good enough for me.

[SweetAccord]

You all forgot the wife or girlfriend. . . .

[smm_cbf]

gosh, is this for racing or just a lake run?

[Ub Hauled]

If you are using AM/FM radio, crystals for Rx and Tx...
You never know if one goes out when you drop the radio
or if people have the same frequencies as you for some reason.

being extra cautious.

[Geeves]

Lake run but its 4-5 hours form home and a bunch of children will be using the boat. I bought it more as a family toy.

[Ub Hauled]

...............

[Mich. Maniac]

You all forgot the wife or girlfriend. . . .

No We didn't!!!

[rocket-ron]

And don't forget your Craftsman Tool chest on wheels to carry it all,(or a small U-Haul trailer! Ron

[Ctonez]

I'd add a temp gun or infrared thermometer for checking motor/esc/battery temps after long runs.

[SweetAccord]

Temp gun! Good one to not forget . . . .