can i safetly run 2- 7 cell packs without toasting the esc? dont have any cooling issues whatsoever with props and motor now running hills ib 6 cell pacs would like to run 2 ib 4200 7cell packs
what is the cell limit on sv27 esc
Collapse
X
-
from what ive heard you are fine but wait for some more advise to come along to ethier prove or disprove this.Failure is the First step to SUCCESS

-
Don't cut wires...two ways I do this
1) simply remove the esc's red wire socket from the plug and fold it back onto the wires and tape/heat shrink it in place
2) make an extension up that has the same thing done to it or has had the red wire cut off.that way you're not messing with the esc's plug
I've included a couple pics in case my words weren't clear enough
HTH
GhostComment
-
Comment
-
The BEC inside a ESC can only regulate so much voltage that is connected by a battery by design. When you conntect more voltage than it can handle, it's not capable anymore, so glitching, heating, etc occur. So, you disconnect the red wire to not get this voltage and supply the ESC with voltage it can handle, hence the seperate battery pack.
Hope that clarifies.
Peace~Comment

Comment