7 cell packs?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • avengersteve
    Senior Member
    • Apr 2007
    • 321

    #1

    7 cell packs?

    can i run 2 7cell packs? ib3600 on the stock set up? is it worth the extra cells? what will i notice diffrent? Thanks
    restoring the collection
  • sjslhill
    Fast Electric Addict!
    • Apr 2007
    • 1513

    #2
    Steven told me to run 12 cells.

    Comment

    • ice329
      Senior Member
      • Apr 2007
      • 792

      #3
      Approx 4 MPH. My test was around 4MPH differnce between 6 and 7 packs. There is a but.. you really should beef up the cooling and change the radio to run the 7 cell deal. Good six cell packs are really plenty fast but there is a noicable differnce on 7 cells.

      Comment

      • avengersteve
        Senior Member
        • Apr 2007
        • 321

        #4
        Originally posted by ice329
        Approx 4 MPH. My test was around 4MPH differnce between 6 and 7 packs. There is a but.. you really should beef up the cooling and change the radio to run the 7 cell deal. Good six cell packs are really plenty fast but there is a noicable differnce on 7 cells.
        yeah, i have the spektrum dx3 for the radio, and plenty of 6 cell packs... just want a little bit more..
        restoring the collection

        Comment

        • SJFE
          Fast Electric Addict!
          • Apr 2007
          • 4735

          #5
          I run my 7 Cell IB3600 BattlePacks with no problems what so ever to date. Temps avarage 110 on the motor and 120 to 125 on the packs. All this on a 45mm cf prop. It's been cold here so lets se what summer brings. Another thing to take into consideration...I don't care about cooking the motor or esc...Just gives me a reason to upgrade. I do how ever care about over heating the batteries.

          Comment

          • ice329
            Senior Member
            • Apr 2007
            • 792

            #6
            Well like I said beef up the cooling, use the OSE water jacket, open all the fittings and the pickup. Watch your temps on everything because your pushing the envelopes. I dont peak the 7 cell pack either. Dont over prop. I charge the pack then I let them set for a hour or 2. All I run is 7 cells in the ICE Rocket and I have no problems so far. Knock on wood! I have stock motor and esc drive cable etc. Cooling is worked and rudder lowerd 1/4 inch, and went to a PM3radio. A nice wax job and thats about it... hehhe It works for me...

            Comment

            • SJFE
              Fast Electric Addict!
              • Apr 2007
              • 4735

              #7
              I run the following OSE hopups. WaterJacket, drive cable, propshaft, drivdog combo, tabs and bulkhead fitting. I didn't open up the cooling because IMO the jury is still out on that one. Next winter I'm refitting the boat with Feigao power and SpeedMaster hardware.

              Comment

              • ice329
                Senior Member
                • Apr 2007
                • 792

                #8
                I watched my temp change a lot as the water warmed up in the pond. I was seeing high 90's and thought what are these guys talking about but the pond was 48. When the pond got close to 70 I see 120's on the Rocket, but less on the stock boat running 6 cells, like 105-110. Your water up there is still real cold, you may see more temp when it warms up. I just read all the posts on RCU and decided to do it. I am happy I did because I relax a little more knowing its done.

                Comment

                • avengersteve
                  Senior Member
                  • Apr 2007
                  • 321

                  #9
                  i got the jacket, cable drivedog... and am adding cooling to it.. i will be putting on the trim tabs from the v24 just for the motor, and using the rudder pick up for the esc... then i may do something for the batterys.. but not to sure yet
                  restoring the collection

                  Comment

                  • SJFE
                    Fast Electric Addict!
                    • Apr 2007
                    • 4735

                    #10
                    I'll go with a second propwash pick up if I see a jump in temps. Pop in another bulk head fitting and cool the motor and esc in seprate systems.

                    Comment

                    • ice329
                      Senior Member
                      • Apr 2007
                      • 792

                      #11
                      hahah GO FOR IT, just dont do it unless you can stomach that OT OH smell heheh You never know

                      Comment

                      • avengersteve
                        Senior Member
                        • Apr 2007
                        • 321

                        #12
                        o im doing it... :D
                        restoring the collection

                        Comment

                        • ice329
                          Senior Member
                          • Apr 2007
                          • 792

                          #13
                          Early tests..old video

                          Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today!

                          Comment

                          • SJFE
                            Fast Electric Addict!
                            • Apr 2007
                            • 4735

                            #14
                            Hey Ice..there are still spots avalable in the SJFE one handed driving school:p .....:D

                            Comment

                            • ice329
                              Senior Member
                              • Apr 2007
                              • 792

                              #15
                              That camera almost went into the drink twice... I need a tripod. I know something is going in sooner or later just hope its not the PM3

                              Comment

                              Working...