supervee 27 fast sucker =)

[fastblack]

7 cell not enough rpm

so i put in hydra HV 120a esc. 8cell lipo. x642 leo 4074 1400kv 41440rpm unloaded.

Now the thing move =))))

[fastblack]

oh my god 8cell 4000mah 25c-50c nanotech 112kmph gps the thing is sick
x642 detounge prop

[Goonboy2]

You haven't said anything about the rudder - is it still stock? If not, what are you using?
You are trying things with your SV that the rest of us have only thought about.

[fastblack]

stock rudder epoxyed holes for waterintake. im using waterintake as in supervee 27r

[launchpad]

supervee crash

I don't think the Supervee hull will survive crashes at that speed unless you've done some serious CF reinforcement. Just sayin'

Hello there;
I just finished ready your comments on the supervee.I have one myself and last year I was running it on a pond near my place.Some guy was on the other side and when I noticed him putting something in the water.All of a sudden I had no control over my boat.All I could do is close my eyes and hope for the best.It was heading straight for the dock and I turned and looked the other way,then BANG! I looked at the wife and asked her is the boat still floating.She told me it was,and that shocked me.When I lifted it out of the water there was lots of things broken on the inside and there was a crack along the side for 10 inches.So I had to rebuild it.But that tells you what kind of abuse it can take.I did find out that the guy on the other side was on the same frequency that I was on.He took off so fast I could not catch him.I know when I take my boats out and there is someone there running there boats I ask what frequency they are on.To avoid problems like I had,check with the other rc's and make sure you's are on different frequencies.
My new project is twinning the Genesis boat.Almost done,just waiting for two parts and the batteries.

[makin' waves]

you need to get a 2.4 tactic them you won't have any radio issues

Tone

[launchpad]

supervee

you need to get a 2.4 tactic them you won't have any radio issues

Tone

Hello;
I have been changing tx and rx to 2.4 just have to get two more and I am all set.