Help needed with Nitro Conversion

[Arct1k]

Hi,

I've been given a Nitro SuperVee with no motor that I'd like to convert to electric.

I'm told the radiobox is cracked but assume this can easily repaired with silicone and epoxy.

i have a medusa 60mm 2000k that I throw in but it will need a water heatsink and motor mount.

I'll post up some pics when I get it but any tips as to what i might need?

I assume I can just use a waterproof traxxas 2070 for steering and a regular spektrum car rx/tx.

Thanks in advance.

[makin' waves]

Vinnie909 has converted his from nitro to electric, so he'd be tha best to talk to...

Goodluck!

Tone

[Arct1k]

Getting my toes wet picked up a nitro sv27 hull with hardware.

- sealed the hull
- made a motor mount
- dropped in a medusa 60mm 2000kv and hydra 120 amp
- 4s lipo

[Vinnie909]

nice, now u just gotta fill the hole in the back, all i did with my hole is fill it with 5 min apoxy, i put tape on the back side then filled the hole with resin on the inside then let it dry then pulled they type off and it was nice and flat,

[Arct1k]

Thank - Its all filled :) - I used small pieces of 1/8th lexan glued in place with 60min epoxy from the inside...

[Vinnie909]

r u going to buy a new top hatch? i put the electric one on mine cuz it has no air vents and didnt want any water coming in my hull

[Arct1k]

I just filled all the holes on the hatch too... Didnt seem worth buying a new hatch for that..