sv 27 motor

[domwilson]

RPM's and KV ratings are only a part of the overall picture.

[SweetAccord]

I know, I was waiting for that answer "RPM's and KV ratings are only a part of the overall picture." ....hehehee..

[Steven Vaccaro]

Not sure where 41,000 came from. Most estimate the stock motor is 1600-1800kv, which is in the 30k range at 18volts.

[domwilson]

Good eye! I didn't catch that one.

[SweetAccord]

Ok 32,400 RPM. Sorry, sorry. Was looking at another spec value on another motor.

[SweetAccord]

Well I will be getting the AMMO 2600 and the Feigao 8XL. One has torque, one has the speed, so it will be interesting to see with a 440/3 how each handles in the SV.

[domwilson]

Have you looked at the L series motors from Feigao? The 9L and 10L motors are pretty good and hold up pretty well. Steve carries those here.

[domwilson]

Plus they're purple and look really cute.

[SweetAccord]

Ah, cute motors, that's what I need!!

[SweetAccord]

Plus they're purple and look really cute.

So which of these Feigao's do you run...what is your setup domwilson?

[Monsterbrad]

Motor not working after sinking???

Ok
A buddy has this boat i have ha villian and he flipped it in a pond and it took a diver to get it from about 10ft down.
Team Orion 4500's ok
Speedo still try's to program when you plug it in and the motor does nothing
I have a new motor on the way
Do you guys think it is junk???
Oh yes on another note the boat sat in the pond for 2 days before the diver my brother could get to it

[Monsterbrad]

Swamped for 2 day's SV 27 MOTOR

My buddy sunk his boat and it sat for 2 days before we got to it under water.
A diver had to get it (my brother) in 10 ft of water.
The speedo acts like it wants to work beeps and all and responds to the arming set up but the motor does nothing
Ordered a new motor
Is there any way to save the old motor???

[SweetAccord]

It would depend how you think it looks. Is is corroded, rusted? Is it still under warranty? Not that it would be covered, but maybe AQ would rebuild it at half the cost? They have been very generous to me on things, bu that was under warranty. For the cost, you better off getting a new one. Any pics to evaluate?

[RandyatBBY]

I have sunk several boats over the years and got them back at the end of the race. The rotor will be a little pitted but will still work, the whole motor needs to be sprayed with WD40 and can be saved if you did not burn any of the insulation off the windings. Bearings may need to be replaced too.