need advice

[driftah]

I am running a bone stock sv27 but use some good 2s lipos to fuel it.My question is this..I have a 42x55 prop on the way and just wondered if a decent setup for this with built in lipo cut would be a system from a ul-1 boat as I have seen others do it? either that or get an ammo or feigao motor with a seaking esc? dunno on which way to go here any advice folks.

[Diesel6401]

I am running a bone stock sv27 but use some good 2s lipos to fuel it.My question is this..I have a 42x55 prop on the way and just wondered if a decent setup for this with built in lipo cut would be a system from a ul-1 boat as I have seen others do it? either that or get an ammo or feigao motor with a seaking esc? dunno on which way to go here any advice folks.

I run ul-1 power, you can click the sv in my signature to see a youtube video. I run it with a 42x55. I average mid to high 40s and temps are always good. i run on 4s (2x2s in series). I like it personally, runs better than stock the ul esc is way smoother the sv esc and boat is happy in mid 40s range. I sold a feiago 540 11xl to a guy and he's running in the 50s. SV in the 50s normally = a flip though. Some guys are running the ammo 2300, you have to run it pretty loose though temps get high fast. My vote ul-1 power. JMO Happy boating.

[wizard122]

go UL-1 you will be very happy