A quick ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brushless01
    Senior Member
    • Apr 2010
    • 487

    #1

    A quick ?

    With this kit http://www.offshoreelectrics.com/pro...svcable&cat=52 do i have to use the teflon linear also ??
    Prince 25 8XL,Delta force 29 8XL, SV27,Rio 51,Mini Rio,Stock Miss Geico m445,ERBE,Baja 5B SS, Hyper ST, Castle Emaxx.
  • wizard122
    Senior Member
    • Oct 2009
    • 483

    #2
    Yes you should.
    2 SV 27's and Vac-U-Pickle UL-1 Power

    Comment

    • Brushless01
      Senior Member
      • Apr 2010
      • 487

      #3
      How do I get it in there ???
      Prince 25 8XL,Delta force 29 8XL, SV27,Rio 51,Mini Rio,Stock Miss Geico m445,ERBE,Baja 5B SS, Hyper ST, Castle Emaxx.

      Comment

      • Brushless01
        Senior Member
        • Apr 2010
        • 487

        #4
        Does it go inside the brass
        Prince 25 8XL,Delta force 29 8XL, SV27,Rio 51,Mini Rio,Stock Miss Geico m445,ERBE,Baja 5B SS, Hyper ST, Castle Emaxx.

        Comment

        • m4a1usr
          Fast Electric Addict
          • Nov 2009
          • 2038

          #5
          Originally posted by Brushless01
          Does it go inside the brass
          It slides in the brass tubing. The stock SV27 seems to come with a 2 piece section of liner. Not sure why, but it is commonly found as such. Its easier to insert with the stinger off the hull. But you can get it in from the motor side too.

          John
          Change is the one Constant

          Comment

          • wizard122
            Senior Member
            • Oct 2009
            • 483

            #6
            Yes remove the motor and the strut bushing then push new Teflon liner into tube and cut to length and your done runs much smoother.
            2 SV 27's and Vac-U-Pickle UL-1 Power

            Comment

            • Brushless01
              Senior Member
              • Apr 2010
              • 487

              #7
              Ok thanks
              Prince 25 8XL,Delta force 29 8XL, SV27,Rio 51,Mini Rio,Stock Miss Geico m445,ERBE,Baja 5B SS, Hyper ST, Castle Emaxx.

              Comment

              • archuraas769
                Member
                • Jun 2010
                • 53

                #8
                i wouldnt use the liner cause mine melted to my flex shaft , but thats just me i gues

                Comment

                • wizard122
                  Senior Member
                  • Oct 2009
                  • 483

                  #9
                  How did it melt it? It's teflon and should be lubed any way. You may have something not lined up right. The one in my boat is a year old and looks new.
                  2 SV 27's and Vac-U-Pickle UL-1 Power

                  Comment

                  Working...