Venom 5400 lipos in stock SV

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sci-flyer
    Member
    • May 2007
    • 35

    #1

    Venom 5400 lipos in stock SV

    Just bought a pair of 2s2p 5400 mah lipo pacs rated at 20c (108A)
    Can I run these with stock motor, esc., prop?
    I did a search and could not find much info on the Venom lipos.
    I know there are better cells out there.
    This is just a sport boat, so I'm not trying to break any speed
    records.
  • dana
    Banned
    • Mar 2010
    • 3573

    #2
    you should be able to. i run those exact same packs in my ul-1.

    Comment

    • sci-flyer
      Member
      • May 2007
      • 35

      #3
      Thanks dana...
      I will give it a go.
      The boat is much lighter with these pac's
      so they have to go much forward than my NiMH ones.

      Comment

      • archuraas769
        Member
        • Jun 2010
        • 53

        #4
        ya im running 2s2p lipos and u should be fine ur weakest piont will be your ESC

        Comment

        • wizard122
          Senior Member
          • Oct 2009
          • 483

          #5
          Batteries

          Originally posted by sci-flyer
          Thanks dana...
          I will give it a go.
          The boat is much lighter with these pac's
          so they have to go much forward than my NiMH ones.
          You will need to remove the battery trays and use Velcro instead to hold them in place start with them about even with the end of the stringers and move them forward till at runs without wanting to blow over then mark the spot OK
          Attached Files
          2 SV 27's and Vac-U-Pickle UL-1 Power

          Comment

          • sci-flyer
            Member
            • May 2007
            • 35

            #6
            Thanx Wizard

            Thaxs for the pic.
            I didn't say before, but my SV hull has been altered.
            Remember the worlds fastest SV competition?
            Well anyway the boat was chopped 1.25 or so, and
            set up for a 8XL and 4s-2s lipo.
            Had problems with ESC"s so I lost interest in the
            project. (spent too much money)
            Now I am dialing back to the stock motor and ESC.
            After all the work that went into this hull mod I
            just would like to get it running again.
            I will try to attach a pic.
            Attached Files

            Comment

            Working...