Sv motor upgrade options ??

[Brushless01]

What would you reccomend ??

And would a neu castle 1515 fit the mount ??

[m4a1usr]

Yes a 1515 will fit in the stock mtr mount but its not the right mtr for that hull. Its too big. A 1512 is the recomended hop up mtr for the hull and more then enough to push the hull into unstability. You could get by with a 1509 too as that mtr has more power then the stock one does.

If you wan to go crazy fast get a 1512 2D. Just make sure you always tape up the hatch because you will end up flipping it when you least expect. But it is fun hauling the mail!

John

[Brushless01]

Might try this motor and esc the 2200kv http://www.offshoreelectrics.com/pro...-combo&cat=134 should get 60 mph on a x447

[wizard122]

I've run mine with the Ammo 2300 and got over 50MPH out of it but it was upside down more than not. The SV at over 45mph is a handful to run I put the stock SV motor back in and get 40 MPH all the time with a Grim 42/55 and it runs great. My friend has a UL-1 setup in his and that runs great also. I think that if you really want to go that fast its time for a new boat maybe a DF 33 anyway thats just my 2 cents.

[BakedMopar]

I had a Feigao 12l in mines. It was a little quicker than the SV motor and I was still able to use the stock esc.

[Diesel6401]

Might try this motor and esc the 2200kv http://www.offshoreelectrics.com/pro...-combo&cat=134 should get 60 mph on a x447

Hull is rated at 50mph, anything even close to that is a handfull. Mid 40s is where the boat is happiest IMO...

[forescott]

Might try this motor and esc the 2200kv http://www.offshoreelectrics.com/pro...-combo&cat=134 should get 60 mph on a x447

A supervee at 60mph is an airplane.

[Diesel6401]

I wouldn't spend Neu money on a SV, if you want a different motor rock a 12l like baked said or ul-1 power like mine and it will run good. If you wanna run a Neu, buy a DF hull or even a DF copy, JMO....

[Brushless01]

Ive already got one with a ammo 2300 and im shortly getting a erbe so i might try the mamba in a sv

[Brushless01]

Any more suggestions any welcome

[Brushless55]

I wouldn't spend Neu money on a SV, if you want a different motor rock a 12l like baked said or ul-1 power like mine and it will run good. If you wanna run a Neu, buy a DF hull or even a DF copy, JMO....

[Brushless01]

How about the mmm combo in a delta force 29 with sv hardware