busted shaft

[jlr3rd1]

has any one had this happen???? the solid part of the shaft were it meets the flex cable spins??? you can hold the flex cable and twist the solid part of the shaft????

[Diesel6401]

has any one had this happen???? the solid part of the shaft were it meets the flex cable spins??? you can hold the flex cable and twist the solid part of the shaft????

I ordered the upgraded flexshaft from kintecracing. Way better made than the stock. Not sure if this helps, but it works very VERY well. Good luck.

[jlr3rd1]

yes it does thanks :) i will check it out thanks

[Jeff Wohlt]

Silver brazed is the way to go. Most use loctite and silver solder....as I did as well but now I sell these. Not fun to make but they do not fail.

I have them on my site. You might send it to me and if it is clean enough I will braze it for you.

[jlr3rd1]

wow thanks :)

[Steven Vaccaro]

I carry a pretty nice cable also.
http://www.offshoreelectrics.com/pro...od=ose-svcable

[Ctonez]

that very same thing happened to a cable in one of the SV's at our club race yesterday. The replacement Steve has here is great...get 2 and you should be set for life.

[Brushless55]

I carry a pretty nice cable also.
http://www.offshoreelectrics.com/pro...od=ose-svcable

I put one in my MM this weekend and that is a very nice cable!
now I need one for my SV and UL-1