Best Batt Charger?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ROOSTERTAIL
    Member
    • Jun 2007
    • 34

    #16
    You should be fine as long as your balancer is functioning properly. That is the idea, to make sure all cells are equal or balanced. none should be overcharged,. ALWAYS TAKE THE MANUFACTURERS GIVEN SAFETY PRECAUIOTNS FOR CHARGING LIPOS SEIROUSLY AND FOLLOW THEM AS GIVEN. ALSO USE A CHARGE SACK OR VAULT WHEN CHARGING THEM!!!
    Last edited by ROOSTERTAIL; 07-24-2007, 10:57 AM.

    Comment

    • Superveekiller7
      Member
      • Jun 2007
      • 38

      #17
      is a glass dish ok to charge them??

      Comment

      • Fast Guy
        Senior Member
        • Apr 2007
        • 135

        #18
        Originally posted by ROOSTERTAIL
        You should be fine as long as your balancer is functioning properly. That is the idea, to make sure all cells are equal or balanced. none should be overcharged,. ALWAYS TAKE THE MANUFACTURERS GIVE SAFETY PRECAUIOTNS FOR CHARGING LIPOS SEIROUSLY AND FOLLOW THEM AS GIVEN. ALSO USE A CHARGE SACK OR VAULT WHEN CHARGING THEM!!!
        That was my #1 reason for choosing E-moli cells. They seem to be safe. Had a motor dead short and melt the soder on the deans connectors. Batteries came out no worse for the wear. The other lipos scare me.

        Comment

        • ROOSTERTAIL
          Member
          • Jun 2007
          • 34

          #19
          Originally posted by Superveekiller7
          is a glass dish ok to charge them??
          I HAVE GOT TO SAY NO TO THIS, If you have never seen a Lipoly pack go off it can be anything from smiple smoke to an expolsion, The BIG BANGS are rare but can happen!!!!!
          Last edited by ROOSTERTAIL; 07-24-2007, 10:56 AM.

          Comment

          Working...