Double 2s or Single 4s?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vertman
    Junior Member
    • Sep 2014
    • 14

    #1

    Double 2s or Single 4s?

    The owners manual says there is a slight performance advantage of using a single 4s lipo pack over double 2s packs in the Revolt 30.

    Have any of you noticed any advantage in the real world? (assuming mah, C rating etc are the same?)

    Thanks.
  • Chilli
    Fast Electric Addict!
    • Jan 2008
    • 3070

    #2
    If you are using quality packs, do a good soldering job on your connectors and your wires aren't too long I doubt you will notice any difference.
    Mike Chirillo
    www.capitolrcmodelboats.com

    Comment

    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557

      #3
      Correct, you wont be able to tell any noticable difference with good bullet soldering and minimum wire length. 2 x 2s is the easiest to fit and keeps the boat balanced well.
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

      Comment

      Working...