Picked up a second revolt today!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Cinnabun
    Senior Member
    • Jun 2013
    • 433

    #1

    Picked up a second revolt today!

    I currently have a red revolt, getting the leopard treatment with an m545. Today picked up this silver revolt 30 for $50 bucks. It's missing the motor. But everything else is in great condition. A few scratches here and there, and the nose has a small chip. Going to keep this one stock powered I think, throw my revolts stock motor in it and use it to putt around.

  • SirBenno
    Junior Member
    • Aug 2013
    • 8

    #2
    Nice grab. Expecting my Revolt any time in the mail now (my first boat actually). Glad you like it enough to have 2! :-)

    Comment

    • skeeler
      Senior Member
      • Jul 2007
      • 198

      #3
      What Leopard motor are you using and what ESC are you using to drive it?

      Never mind. I saw your other thread: http://forums.offshoreelectrics.com/...revolt+leopard
      Revolt 30, River Jet, Southampton Tug, Outcast 6S BLX, 8ight-E, Ten-SCBE, 22 2.0.
      '09 Miata.
      Ibanez basses and guitars. Mapex drums, Zildjian cymbals.

      Comment

      • Cinnabun
        Senior Member
        • Jun 2013
        • 433

        #4
        It's funny how my silver one is so much more reliable. Way more stable, and doesn't break. LOL

        Comment

        • godether
          Junior Member
          • Jul 2013
          • 3

          #5
          anyone having issues with stock rudder on the revolt 30, i am having terrible rudder wobble and can't seem to fix it, any suggestions? Cheers

          Comment

          • Cinnabun
            Senior Member
            • Jun 2013
            • 433

            #6
            Check the grub screws on the rudder and rudder control arm

            Comment

            • jjohn581
              Member
              • Jan 2011
              • 33

              #7
              Steering problem with my revolt yesterday after about 3 runs - both grub screws on rudder & control arm were loose. Just tighten up. After I 1st got it tightened all hardware but overlooked those 2. Should fix your problem

              Comment

              • Phoebe
                Member
                • Jul 2013
                • 43

                #8
                Use blue loctite (242) on all your fasteners.

                Comment

                Working...