Will the stock motor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MAMBA2200
    I need a scooby snack
    • Jul 2012
    • 1202

    #1

    Will the stock motor

    well will the stock motor handle 6s being a 1800kv i think it should but wanted to get opinions thanks
    Im Only Responsible For What I Say Not For What You Understand
  • dana
    Banned
    • Mar 2010
    • 3573

    #2
    5s yes, 6s? Maybe for a short time, but it will eventually destroy it. Could be 30 seconds, could be 3 runs. Bad idea tho

    Comment

    • MAMBA2200
      I need a scooby snack
      • Jul 2012
      • 1202

      #3
      hhhhmmmmm ok thanks guess i will just upgrade it any suggestions?
      Im Only Responsible For What I Say Not For What You Understand

      Comment

      • dana
        Banned
        • Mar 2010
        • 3573

        #4
        Of course I could be totally wrong. I would go for something in the 1500 kv range

        Comment

        • MAMBA2200
          I need a scooby snack
          • Jul 2012
          • 1202

          #5
          i used to run a 2200 castle in my spartan on 6s and ive seen many people use a 1800 leopard in the spartan but im still learning this kv and cell business in boats
          Im Only Responsible For What I Say Not For What You Understand

          Comment

          • Make-a-Wake
            FE Rules!
            • Nov 2009
            • 5557

            #6
            Why higher voltage? Why not just prop up on the 4s setup? An x640 or even an m445 may really liven it up.
            NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

            Comment

            • MAMBA2200
              I need a scooby snack
              • Jul 2012
              • 1202

              #7
              well i went back to test the 45x68 and did not gain a bit of speed just wanted to jump it up some and see what happened
              Im Only Responsible For What I Say Not For What You Understand

              Comment

              • Make-a-Wake
                FE Rules!
                • Nov 2009
                • 5557

                #8
                You're using a high lift prop on a Vee hull that wants forward propulsion....................
                NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                Comment

                • MAMBA2200
                  I need a scooby snack
                  • Jul 2012
                  • 1202

                  #9
                  thats why im thinking 6s lol
                  Im Only Responsible For What I Say Not For What You Understand

                  Comment

                  • Make-a-Wake
                    FE Rules!
                    • Nov 2009
                    • 5557

                    #10
                    So running an extreme voltage, on a smallish motor with a lifting prop designed for a Hydro or rigger is the answer................
                    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

                    Comment

                    • MAMBA2200
                      I need a scooby snack
                      • Jul 2012
                      • 1202

                      #11
                      thats what im asking should i go with a different motor for that voltage cause im thinking i got a dud motor or would you suggest a different prop was thinking of a prather 220 what is your opinion
                      Im Only Responsible For What I Say Not For What You Understand

                      Comment

                      Working...