3s in the mini rio

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kmot
    Junior Member
    • Apr 2007
    • 16

    #31
    Here is a short video:

    Comment

    • Chop
      Senior Member
      • Nov 2007
      • 504

      #32
      Kmot,

      What is the "C" rating on the 3s lipo? I have a couple of 3s, 1100mah, 12c lipo's lying around. The Mini Rio looks like a good place to put them to work... IF they fit.

      I just don't like the looks of the very light (18 ga.?) wire in the stock setup.
      There is a fine line between "hobby" and "mental illness."

      Comment

      • Kmot
        Junior Member
        • Apr 2007
        • 16

        #33
        Chop: This particular battery is rated 23C. The first time I ran it, the battery wire insulation started to melt slightly. I removed the esc from the boat, cut the wires down to 1/2" pigtails, and soldered on 16ga wires. I believe the stock wires are 20 or 22 ga.

        Comment

        • Junior5150
          Junior Member
          • Jun 2008
          • 19

          #34
          Here is a video I made from saturday. I tried my brushless the next day but it made my batteries so hot i couldnt touch them so I converted back. I think the brushless needs a 3s pack not a 2s pack, any suggestions?

          Comment

          • Avanti
            Fast Electric Addict!
            • Nov 2007
            • 1280

            #35
            any updates on the stock electronics holding up to 3s
            The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

            Comment

            • Avanti
              Fast Electric Addict!
              • Nov 2007
              • 1280

              #36
              My rio lasted 1.5 laps on 3s before taking a dump, I do not advise 3s on stock esc.
              The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

              Comment

              • p.swiggs
                Member
                • Oct 2009
                • 86

                #37
                hey how much did your whole rear set up cost you?

                Comment

                • lonewolf
                  Senior Member
                  • Jul 2007
                  • 658

                  #38
                  If you are referring to the rudders....................They are not currently available. By this manufacture.
                  Twin cat 9xl,... 29 titan 8xl,....37 in mono kb48 8xl.... 42 in twin elc cat project... 42 in gasser cat 260 modded zenoh''' planes and trucks....

                  Comment

                  Working...