I use a thin film of Grim Racer Speed Grease on the UL1 shaft. I re-lube after each day of usually 4-6, 1 mile ea runs. The play in my bushing is somewhere in the 1/32 to 1/16" range...probably closer to the 1/32"side.
I also use the below in my other boats...the reel oil is great for u-joints and gears and in places you can't get the thicker grease. I also use it on my Crackerbox boat shafts before I add the Speed Grease.
I also use the below in my other boats...the reel oil is great for u-joints and gears and in places you can't get the thicker grease. I also use it on my Crackerbox boat shafts before I add the Speed Grease.
Comment