Ul-1

[part time rc]

Has anybody tried putting the rudder on the right side

[mdurant76]

As far as u know it has not been attempted due to possibilities of it not being reinforced enough for the rudder to be housed there. Another concern is that the boat typically wants to turn right so adding mor drag on that side may cause it to be a little bit harder to control at speed.

[Grimracer]

The prototype was ran and tested that way.. just did not like it, not enough triangulation on the Turn fin.

Grim

[part time rc]

Thanks Michael
How can I change the angle of attack on UL-1?

[tlandauer]

Thanks Michael
How can I change the angle of attack on UL-1?

Read Darin's thread:

http://forums.offshoreelectrics.com/...-UL1-Race-Prep

page 2, post no. 31
That is how you do it, although Darin was blue printing the ride pads, any changes in the AOA will be done in that process.

[part time rc]

Read Darin's thread:

http://forums.offshoreelectrics.com/...-UL1-Race-Prep

page 2, post no. 31
That is how you do it, although Darin was blue printing the ride pads, any changes in the AOA will be done in that process.

Thanks