GUY'S last year I got my sv27 in the water three times.The last time I flipped it and got the anttana wet she came in and I fixed it than dropped back in and she would crap out like it could not arm it self,Took it back out the next day same thing one lap crap out, so I payed for a used ul1/motor and 60esc with controler,I put the old 60ampand put in the hydro today and she made one pass and crapped out IS IT THE 60AMP FROM LAST YEAR THAT'S CRAP,Has anyone had this happen, When I get it in she try's to re arm,
ul 1 /60amp in sv27
Collapse
X
-
What is crap out? just shut down or stutter or intermittent?!?
* Shot in the dark, but it could be a cap issue. Is it the older ul esc with the smaller cap or does it have the HUGE cap hanging off the end? http://www.offshoreelectrics.com/pro...od=dh-aqum7011
If it has the smaller cap on it. Try soldering on a new one.Comment
-
wow look's like it's the old one /D/ the top one is the one I'v been useing ,never tested the other.Me and dana split a ul1 on the swopshop.So I could get the /tactic 2.4 and put it in the sv,because I thought the proboat was bad in my sv last year.And I took the other motor and put it in my hydro, I'v just been swopping the tactic controller around all three boat, And when I found out I had no other conector's for the 60amp from the one me and dana gotWhat is crap out? just shut down or stutter or intermittent?!?
* Shot in the dark, but it could be a cap issue. Is it the older ul esc with the smaller cap or does it have the HUGE cap hanging off the end? http://www.offshoreelectrics.com/pro...od=dh-aqum7011
If it has the smaller cap on it. Try soldering on a new one.
,I just pulled the one out my sv just to test the hydro yestureday and she just brockplain and shutdown when I got her back to the me opened her up and she rearmed ,dropped back in the water same thing,
Can I change the bullet's to the other 60amp or do I need to,
Attached FilesComment
-
I would try adding an additional cap bud. Also make sure your batts are real good, nothing less then 4s lipo or the lvc will kick in.Comment
-
lvc=low voltage cut offGrand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
Thats right dana,I was using one a proboat with my hydro and the sv but I thought it was bad ,so I got another that was a tactic 2.4 with a motor and esc all in one, and someone else got the hull,
Comment
Sorry bud
Comment