65 mph stock ul1

[Brushless01]

http://www.aquacraftmodels.com/boats/aqub20-ul1-superior/aqub20-65mph.html

[Doby]

I got mine to 52.8 Mph (according to my trusty GPS) yesterday. Bone stock with just a new Grimracer prop. All temps were around 110 after about 2 minutes. Powered by a couple of 30C 5000 mah Turnigys.

Thers more in there for sure, but it becomes a handfull at that speed.

65 is really hauling ass!

[Fluid]

Old news from 2008. I pitted next to Brian and watched the boat's speed progression as the tuning continued. It wasn't easy to get there, the prop was huge, and that is not a two minute setup. It was also pretty flat water for the fastest run....

[Doby]

Old news for some, not for others......

[Fluid]

So you aren't interested in a first-hand report instead of a press release? After all it did happen over 1-1/2 years ago.....that ain't exactly new.




.

[VIKOS]

But yet may still ve hard to beat.

[Doby]

So you aren't interested in a first-hand report instead of a press release? After all it did happen over 1-1/2 years ago.....that ain't exactly new.




.

So give us a more detailed report then........

[Fluid]

But yet may still ve hard to beat.

So far no one has been able to even equal that performance. Remember that was not a "GPS speed" so often thrown around on the boards, but an official SAW run through the traps for 330 feet plus run up and slow down.

I've watched Brian tune and tune at SAW events to end up with major speed from several hydros over the years; most were either his own design or heavily-modded models. Here all he did was put on a big prop, play with strut settings and add an air dam. Sounds simple - so why hasn't anyone even equaled this feat?

For more specifics, why not go to the horse's mouth, post #205.

http://forums.offshoreelectrics.com/...0778#post60778


(That other kid's through bothering me, he can go away now.)


.

[Capt. Crash]

So far no one has been able to even equal that performance. Sounds simple - so why hasn't anyone even equaled this feat?

Why would anyone want to? Mine is set up for racing...not SAW runs.

[Brushless55]

So this UL-1 is listed as the fastest RTR boat, but for a saw race?
very cool but what prop was used and how long could you run with that prop without smoking the motor and esc?

[Fluid]

So this UL-1 is listed as the fastest RTR boat, but for a saw race? very cool but what prop was used and how long could you run with that prop without smoking the motor and esc?

See my post above. Two passes, then bring it in.

Why would anyone want to?

I can't believe you asked this.


.

[Brushless55]

See my post above. Two passes, then bring it in.


.

I did see that, but not much more to it?

[Jeepers]

read the link in post#8 then read the thread Brian tells exactly what prop and what he did to tune it.

[Brushless55]

read the link in post#8 then read the thread Brian tells exactly what prop and what he did to tune it.

2047?
thanks!

[Jeepers]

2047?
thanks!

a heavily modded 2047!

your welcome!