UL-1 Break-away Nylon Bolts

[no stick]

I just ordered a Aquacraft RioEP from Tower Hobbies and the boat has dual rudders using break-away nylon bolts. I tied them on my UL-1 and they are the same size as the originals. Here is the link:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=000317233&I=LXXSE9&P=K

Enjoy,

[z400]

Nothing new really.
Alot of people are already using Nylon break away bolts.

[no stick]

I know a lot of people are using nylon bolts. Too bad you thought my post didn't provide any thing new. I thought I was providing an additional source people may not be aware of.

[LiPo Power]

I just ordered a Aquacraft RioEP from Tower Hobbies and the boat has dual rudders using break-away nylon bolts. I tied them on my UL-1 and they are the same size as the originals. Here is the link:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=000317233&I=LXXSE9&P=K

Enjoy,

Thanks for the info, it helps.
Next time I order from them this product will be on my list.
Robert

[alvinsmith75]

I just ordered a Aquacraft RioEP from Tower Hobbies and the boat has dual rudders using break-away nylon bolts. I tied them on my UL-1 and they are the same size as the originals. Here is the link:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=000317233&I=LXXSE9&P=K

Enjoy,

I appreciate your post, as I order from Tower on a regular basis.
Thank You,
Alvin

[z400]

I know a lot of people are using nylon bolts. Too bad you thought my post didn't provide any thing new. I thought I was providing an additional source people may not be aware of.

No need to make me look like a piece of shyt.


Good info, i was just stating that alot of people are already using these and that it is nothing new and unheard of for alot of people.

[Capt. Crash]

Nylon zip ties or brass wire works well too.

[jlr3rd1]

glad i found this thread :) really needed that link :) thks