prop

[rogert]

hi can some one help me with prop for a 33 inch mono with a neu 1521 1577 kv with castle 240 what is the best abc prop I can use for racing in p mono class

[dasboata]

hi can some one help me with prop for a 33 inch mono with a neu 1521 1577 kv with castle 240 what is the best abc prop I can use for racing in p mono class

what ever happened to manners best way not to get a answer from me is don't ask please or thank you ! just saying

[Speedfreek]

what ever happened to manners best way not to get a answer from me is don't ask please or thank you ! just saying

[Speed3]

I think that kV will be too low for P mono. The kV's I hear commonly is 1800 to 2200.

[dethow]

"rogert" has now picked up a Neu 1515 1Y 2200kv for this boat.

Could anyone please help him with some prop recommendations for P-Mono.

Thank you in advance for your help and have a great weekend.

[Speed3]

The octura m545 is a nice prop. Another good one is the m447.

[TRUCKPULL]

A 1521 -1860kv- 8mm shaft is a better motor for "P" Mono then a 1515 -2200kv.

The 1521- 1860kv can swing a 548 for racing, where you would only be able to swing a 445mm with the 1515 in a mono without getting it too hot.

1515 - 2200kv is a very good "P" Sport Hydro motor.

Larry

[Speed3]

A motor I was thinking about was a tp 4060 1950kv, what's the opinion on this motor.

[TRUCKPULL]

A motor I was thinking about was a tp 4060 1950kv, what's the opinion on this motor.

About the same as the 1521- But I would suggest one with a 8mm shaft from TP. and a longer cooler from HRC for racing.

Larry

[royalcasa]

1C1B2528-5E89-4E31-B0B0-0064E3C5ACA4.jpg

what ever happened to manners best way not to get a answer from me is don't ask please or thank you ! just saying

You sir are nobody to talk about manners you are the worst at it. All I did is ask you a question regarding a prop you made for me. And this was your reply.