I have a 29" Sprint Cat powered with a 1600 KV Leopard 4082. This is a dedicated 6s boat running a Seaking 180 v2 ESC with 5.5 mm bullet connectors.
I've run a number of different props starting with an M545, Y547, X448 and now a cupped S215. The S215 is by far the slowest prop in my collection, but for sport running it's plenty fast and things come back nice and cool. The speed calculations I've done say the S215 should be running about 64 mph with this setup as described. I hooked up my truth meter (GPS) and found the best the S215 would do is 51-53 depending on batteries. What I formerly thought was "good enough" now has me wanting to get more speed by bumping up the pitch just a bit.
For those with experience, is it better to increase pitch or diameter for 29" class cat hulls? I have two props in the 2.64" overall pitch range. Both are S/B, one is an M545, the other is an X642. Overall pitch is roughly the same, the difference being one has more blade pitch while the other has greater diameter.
I plan on doing some testing within the next week, but figured this might be a good place to start.
As always, thanks for any insight.
I've run a number of different props starting with an M545, Y547, X448 and now a cupped S215. The S215 is by far the slowest prop in my collection, but for sport running it's plenty fast and things come back nice and cool. The speed calculations I've done say the S215 should be running about 64 mph with this setup as described. I hooked up my truth meter (GPS) and found the best the S215 would do is 51-53 depending on batteries. What I formerly thought was "good enough" now has me wanting to get more speed by bumping up the pitch just a bit.
For those with experience, is it better to increase pitch or diameter for 29" class cat hulls? I have two props in the 2.64" overall pitch range. Both are S/B, one is an M545, the other is an X642. Overall pitch is roughly the same, the difference being one has more blade pitch while the other has greater diameter.
I plan on doing some testing within the next week, but figured this might be a good place to start.
As always, thanks for any insight.
Comment