ABC high pitch props

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jamey
    Senior Member
    • Apr 2015
    • 199

    #76
    that sucks it is off so much. Mine was almost perfect out of the bag. Wow nice polishing job on that octura!

    Comment

    • Turbo Dan-O
      Senior Member
      • Feb 2011
      • 292

      #77
      Okay, just got back from trying out the 1715-17-45 on my Pursuit. I'm not finished with the S/B job yet but it was close enough for some 4S passes. Have not touched the boat since the last(and best) runs with the M445 and the water tonight was very close to the same as it was last time. Also did a back to back test on the Nano Techs vs. Revolectrics again.

      Results:

      M445/Nano Techs: 47.4 mph
      M445/Revos: 50.2 mph

      1715/Nano Techs: 48.0 mph
      1715/Revos: 51.0 mph

      Just like you guys have been saying, the ABC slips quite a bit but picked up a little bit of speed and also came in cooler. The Revos are just awesome! +3 mph and even cooler temps with them.

      I took it back out again and beat on it pretty hard for a while. It ran great and everything still came in under 100*. I'm amped up and my boat is amped down!
      Pursuit: T-180, TP 4060/1620kv. Genesis: T-180, GoolRC 2000kv. UL-1: Bone stock. MHZ Tsunami: Full tilt SAW project!

      Comment

      • rayzerdesigns
        Fast Electric Addict!
        • Dec 2013
        • 1228

        #78
        Originally posted by Turbo Dan-O
        Just got in this 1715-17. It's waaaay heavy on one side but the hole looks centered. Well, here it is(bare) next to an M445(shiny). Hard to tell from the pic but this thing is crazy looking!

        the 5 I have have all been really heavy on 1 side

        Comment

        • dasboata
          Fast Electric Addict!
          • Dec 2010
          • 3152

          #79
          Guys I have a nice supply in stock I get them balanced just fine PM or email me if interested at [email protected] thanks Chris

          Comment

          • rayzerdesigns
            Fast Electric Addict!
            • Dec 2013
            • 1228

            #80
            Hey I'm running a occurs x450 detongued a bit on my p mono what would be a good prop comparable to that to try

            Comment

            • dasboata
              Fast Electric Addict!
              • Dec 2010
              • 3152

              #81
              Originally posted by rayzerdesigns
              Hey I'm running a occurs x450 detongued a bit on my p mono what would be a good prop comparable to that to try
              I would try the 2014-2016 even a 1916 Ray

              Comment

              Working...