Tweet
I have a Genesis with a Leo 4082 with a Swordfish 220a pro and 2x 3s 4000mAh 30-40c lipos running in series. I know the forum offers a lot of input but looking for dirrect input based on my setup. Thanks
-
-
Try the M445, worked the best on mine.Modified Jae21, Stock Jae21, Cheetah, Ul-1, Shock Wave 26 V2 (Rescue Boat). -
Hard to say without knowing what KV motor you have in there. "Leo 4082" is just not enough info.See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
Sorry 1600kvComment
-
1600kv could swing a little bigger than a 45mm. 4mm or so but you have to be careful with the narrowness of that hull.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
How about a x646/3 too big? Too much pitch?Comment
-
I run an X646/3 on that motor in a 36" mono.
It might work if the hull is running well aired out. But if it is running wet you will have a big amp draw. It's a prop I'd work up to.See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
makes senseComment
-
that x648 would have worked well for you i was selling but id start smaller from the get go and work up to it.32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
a x646 is being sold on the forum so I think Im going to snag that one and work up to it with the smaller props I already haveComment
-
Good move.See the danger. THEN DO IT ANYWAY!!!
http://forums.offshoreelectrics.com/...hp?albumid=319
http://forums.offshoreelectrics.com/...hp?albumid=320Comment
-
Thanks for the input guys. Always a big helpComment
-
@ zhevers........ I have a Daytona (CF Genesis) and I am running an X452 Octura prop on mine doing 67mph, I tried the X646 and mustard 64.7mph ....... My motor is 1650KV and I am running a SeaKing 180 esc........ hottest temp I have is 122 on the ESC , 111 on motor, and 97-104 on the batteries so you may want to try it......I'm thinking of trying a X455.Lot Boyz Racing and Marine Team...Get Hype!
CF Shocker Twin - 93.4mph / CF Daytona Single - 80.2mph
FG Shocker Single - 98.3mph / Miss Geico 24" Single - 72.3mphComment
-
I have a x646/3 on it now but im still waiting to run it. What part of VA are you in msundsd5?Comment
-
I can tell ya from experience my Genesis did not like 3 bladed props, but I am running a 2200kv motor on 6S 78mph on a worked x642...still tuning and see alot more mph possible...Id for sure be really careful with that 3 blade. The Genesis is a narrow hull, well suited to "SAW" but it does have torque roll issues. Hope you have CF'd the hull.... DJTunnels-PS295. Cats-H&M M1 Supercat Daytona rivercat. Monos-DF Cyberstorm HiTech 29. Hydros- Ms K Vac-U-Pickle Custom built 37" shovel 10th scale converted to FE Shadow. Rigger-H&M Evo II. AQ Harbortug recovery boat. Build in progress 37" cf DragboatComment
Comment