My home made prop holde.

[stelerzman]

I noticed some of you have prop holders to help in the balancing, thinning and sharpening process. I'm on a budget so I looked around my shop to see if I could build one that's functional. So here is what I came up with.

20130817_220059.jpg
20130817_220238.jpg
20130817_220332.jpg
20130817_220418.jpg


Please lmk what ya think. Also post up what you are currently using and how you like it.
Thanks everyone.

[Peter A]

I have fingers, when it gets to hot I have some water to cool the prop down. I like your idea though, much easier on the fingers!

[JimClark]

A wooden file handel works well also

Sent from my SGH-T989 using Tapatalk 2

[osprey21]

Mine is uber low-tech, but hey, it works.

[Mike Caruso]

Nice easy on old hands and you can pick the diameter to be comfortable thanks for the idea.

[detox]

Those small ABC 3 Blade props are a biatch to thin and sharpen. A Dremel helps lots. Along with a small rough and fine cut file.