Any one run or know these props

[twissted]

I just bought these to run on my 56" catamaran. They might be to much for what I need.
I'm running big motors at a high RPM over 35000. motor is 5694 1200kv 6s and 8s is planned.

NEW S/S 5517/3 Counter Rotating set. Raw Castings not finished.
$T2eC16RHJHEE9ny2q9ECBQOi3EWJT!~~60_1.jpg

[Cooper]

Where did you get them from?
I assume the ss is stainless? Or are they aluminum?

[ray schrauwen]

I think you scored a great set of props for your boat. They will work just fine in a twin at 6S each up to 8S on those motors. You will need the high amp escs you have access to.

Let me explain the scathing I gave you in a past thread that was deleted.

In the past I was somewhat guilty of doing similar things as you have out of enthusiasm but, not at the level you were at. I stopped after a somewhat abrupt post by a fellow member and since then I realized the detrement I was causing. I'm sorry I used such harsh terms but, others have said similar in a not so abrupt tone and it made no difference. I'm hoping you will accept my apology.

Lets just stick to the building, running, tuning, etc.. of boats. Letting people know about good deals is fine as long as it isn't repeated over and over.

[twissted]

Awsome. They are stainless and they are raw castings. I found them on ebay. I can shape polish, sharpen and then balance them. Ray it did have a lot to do with how I handled things. I always try to keep a open mind, and that seems to get me in trouble. I installed the stingers today as well as the rudder. I have the motormounts done and one is epoxyed in place as we speak. I'm using 30 min two part epoxy.

[ray schrauwen]

I wish I found those props first. I know you mean well sir. Keep us posted on your building!

It's always that first hole thats hard to drill. After that things move along.

[twissted]

Thx. I looked on ebaystore of capt-chuck for more of these props but didn't see any. you my want to email him and see if you can get them. I got these for 65.00 plus 4.00 shipping. I think that is better than 1/2 price!

[twissted]

Ok I found the place that sells these props!

http://www.prop-shop.co.uk/index.php?id=25&section=store&sub_section=products&product_type=25