Smallest prop for 1/4" flex

[Hp88]

Whats the smallest diameter prop you can get that fits 1/4" flex cable,

[Fluid]

For what use? Octura's smallest is the 2.4/3 at 61mm, but it is a high lift hydro prop. There are bunch of 67mm props, they are the next smallest on my chart. You'd probably be better off getting a stepped-down stub shaft if you need small props.


.

[ManuelW]

When you order at PropShop UK you can ask for a 1/4" bore. The smallest I got so far was a 55mm hydro prop in stainless steel with 1/4" bore.

regards,
Manuel

[egneg]

What size were you looking for? You could always cut it down if it's not to big of a difference.

[T.S.Davis]

Or just get a stepped shaft that will take 3/16" props. So with that you could go down to an Y536. I run a stepped shaft for Q. Overkill but I got tired of fixing them.

[tornado2405]

Hi

I have Octura X465/2 (64mm) whit 1/4'' bore.
I can sell you.

[dasboata]

I have a bunch of 55MM Prop Shops with 1/4" shaft in stock e mail me if interested thanks chris