Need suggestions for a prop (maybe Octura?) for a all stock Rio EP - 550 motor, 25A esc, 6 cell 3000mah NiMH. Stock is a 42mm frp. Just looking for a good comp or better yet still keeping temps reasonable.
Prop help for stock AQ Rio EP
Collapse
X
-
Hi,
I did a lot of modding to my Rio when it was stock,
And then made it a modded brushless Rio.
I run it on 2s and 3s and the prop I like the best is a x440/3 S & B,
You will need to make a sleeve for the shaft from the 1/8 to 3/16.
But no big deal to do that,
With that prop it has very little torque roll if any and Gps at 32mph and a lot of fun.
This is the first time I ran it on 3s,
I needed to move the port side trim tab down a hair.
To stop the little bit of hopping in the video.
Smooth a glass now.
Comment