small CR props?

[Boaterguy]

looking into starting a twin lynx when they come out.
if this setup is too small, just let me know.
using two of these on 4S

http://fightercatracing.com/index.php?option=com_virtuemart&page=shop.product_details&product_id=31

i can't seem to find any 35-40mm counter rotating props, I think there are k40 CR's but nothing smaller, would the motors spin 40mm props without pushing the limits?

[srislash]

Tenshocks site claims to have counters down to 36mm.I think you have to e-mail them though

[Boaterguy]

it says 1/16", i'm assuming that's a typo?

[srislash]

Yeah,I believe it is supposed to be 3/16.I wondered too as those guys run some small really fast boats over there at times.

[Boaterguy]

emailed them, hopefully they respond tomorrow?
any idea what props those motors will be willing to spin?
thanks for all the help.

[Rumdog]

The aluminum venom props from the kos should work

[srislash]

I would think up to a 440 would be ok for sport.Though I haven't tried an outrunner yet.They are supposed to have more torque.In my books a 440 is a small prop but you never know,just check temps and try.I think there are counter rotating 37mm in Octura or ABC
It's ABC and they are 38mm 3 bladers.Octura has CR 430's then 442's.
Problem is with twins,it is double to keep "trying" props.

[srislash]

The aluminum venom props from the kos should work

There you go 32mm & 36mm 1.4's

[video200]

propshop make most of thair props left and right

http://www.prop-shop.co.uk/

[Boaterguy]

There you go 32mm & 36mm 1.4's

they only come in 4mm shafts.

[siberianhusky]

I killed off the idea of a twin drifter s because of prop availability. Venom props are just to expensive for what you get IMO.
Didn't want to put that kind of money into props that I didn't know would work, then have no use them for.
A ream will properly size the holes in a prop up to 3/16. Abut 15$ for a chucking ream from busybee.
BTW the Venoms are 40$ a pop from OSE, couldn't see spending 80$ on a pair of props.

[Boaterguy]

i would never spend 80 bucks on props, I haven't checked my email yet but we'll see what tenshock said.
i feel like i would have selection from r2 hobbies, tenshock, and a few other places if I just went 4mm.

[video200]

why not go 3/16 and a sleeve ? that way you can have from both worlds
http://www.offshoreelectrics.com/pro...?prod=ose-1030

[Boaterguy]

i already kinda decided on drives, i have one 078 wire and was just going to get one more, to make things simpler, they are 3/16 though.
tenshock : uhh what..?
Dear Friend,

Happy New Year!
Wish you great success and happiness!

Lunar New Year Holiday:
Factory: January 15 - February. 8, 2012 (factory will resume on
February.9, 2012)
Office: January 21 - 31, 2012 (office will resume on February.1, 2012)
Shipment Arrangement: Orders in stock ready for shipment before and
after Lunar New Year holiday should be January 14, 2012 / February 2,
2012.

2012 Nuremberg Fair :
Booth No. H7A, A-148 during Feb.1-6, 2012

wishes,
Tenshock Team

[siberianhusky]

Chinese New Year holiday.